Industrial Automation

E3AS-HL / F / L Series

Distance-settable Photoelectric Sensor

E3AS Series changes the “way of using” reflective photoelectric sensors

E3AS-HL
E3AS-F
E3AS-L
Common to E3AS-HL/F/L series

last update: October 1, 2024

E3AS-HL

Sensing method			Triangulation
Model		NPN Output	E3AS-HL500MN	E3AS-HL500LMN	E3AS-HL150MN	E3AS-HL150LMN
Model		PNP Output/COM3	E3AS-HL500MT	E3AS-HL500LMT	E3AS-HL150MT	E3AS-HL150LMT
*Sensing distance 1**			35 mm to the set distance		35 mm to the set distance
*Setting range 1**			35 to 500 mm		35 to 150 mm
Standard detectable difference *1			35 to 180 mm: 9 mm 180 to 300 mm: 18 mm 300 to 400 mm: 30 mm 400 to 500 mm: 45 mm at 10 m sec		35 to 50 mm: 1 mm 50 to 100 mm: 2 mm 100 to 150 mm: 4 mm at 10 m sec
Display minimum unit value			1 mm		0.1 mm
*Spot size (reference value) 2**			2.5 mm × 1.5 mm at distance of 500 mm	18 mm × 1.5 mm at distance of 500 mm	2.5 mm × 1.3 mm at distance of 150 mm	8 mm × 1.3 mm at distance of 150 mm
Light source (wavelength)			Red laser (660 nm), Class1 (IEC/EN60825-1:2014)
Power supply voltage			10 to 30 VDC (including 10% ripple (p-p)), Class2
Current consumption			100 mA max.
Input/ output	Control output		Load power supply voltage 30 VDC max. (Class2), the total load current of the two outputs is 100 mA max. Residual voltage (Load current 10 mA max.: 1 VDC max., Load current 10 to 100 mA: 2 VDC max.) Open-collector output (NPN/PNP output depending on model) N.O. (Normally Open) / N.C. (Normally Close) selectable
		NPN	OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)
		PNP/COM3	OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)
	External input		Laser OFF / Teaching / Zero reset selectable NPN ON time: 0 V short-circuit or 1.5 V or less, OFF time: Power supply voltage short-circuit or open PNP ON time: Power supply voltage short-circuit or within power supply voltage - 1.5 V, OFF time: 0 V short-circuit or open
Response time			1.5 ms / 10 ms / 50 ms selectable
Threshold setting method			Teaching method / Manual Operations / IO-Link communications
Mutual interference prevention			4 units max. (when using the mutual interference prevention function)
Ambient illumination			Receiver surface illuminance: Incandescent lamp: 20,000 lx max., Sunlight: 25,000 lx max. at distance of 250 mm Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max. at distance of 500 mm		Receiver surface illuminance: Incandescent lamp: 8,000 lx max., Sunlight: 16,000 lx max.

*1. Measured with OMRON's standard workpiece (White ceramic).
*2. Defined by D4σ method at the maximum sensing distance. Detection may be influenced if there is light leakage outside
the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.
Also, when detecting a workpiece that is smaller than the spot size, a correct value may not be obtained.

E3AS-F

Sensing method			TOF (Time of flight)
Model		Type	Metal case ([]: M), Plastic case ([]: P)
		NPN output	E3AS-F1500I[]N	E3AS-F1000I[]N
		PNP output/ COM3	E3AS-F1500I[]T	E3AS-F1000I[]T
Sensing distance			50 mm to the set distance (White paper or black paper 200 × 200 mm)	50 mm to the set distance (White paper or black paper 200 × 200 mm)
Setting range			100 to 1,500 mm (White paper 200 × 200 mm) 100 to 1,000 mm (Black paper 200 × 200 mm)	100 to 1,000 mm (White paper 200 × 200 mm) 100 to 500 mm (Black paper 200 × 200 mm)
Spot diameter (reference value)			95 mm dia. (at distance of 1,000 mm)
Differential travel			15% max. of set distance (Set distance 200 mm min.)
Reflectivity characteristic (black/white error)			10% max. of set distance (Set distance 200 mm min.)
Light source (wavelength)			Infrared laser (940 nm) Class1 (IEC/EN60825-1:2014)
Power supply voltage			10 to 30 VDC (including 10% ripple (p-p)), Class2
Current consumption			30 mA max.
Input/ output	Control output		Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max. (Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.) Open-collector output (NPN/PNP output depending on model)
		NPN	OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)
		PNP/COM3	OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)
Response time			Operate or reset: 150 ms max.	Operate or reset: 90 ms max.
Threshold setting method			Teaching method/IO-Link communications
Ambient illumination			Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.

E3AS-L

Sensing method			Triangulation
Model		NPN Output	E3AS-L200MN	E3AS-L80MN
Model		PNP Output/COM3	E3AS-L200MT	E3AS-L80MT
Sensing distance			10 mm to the set distance (White paper or black paper 100 × 100 mm)
Setting range			40 to 200 mm (White paper or black paper 100 × 100 mm)	20 to 80 mm (White paper or black paper 100 × 100 mm)
Spot diameter (reference value)			25 × 25 mm at distance of 200 mm	4 mm dia. (at distance of 80 mm)
Differential travel			10% max. of set distance	White paper: 2% max. of set distance Black paper: 5% max. of set distance
Reflectivity characteristic (black/white error)			10% max. of set distance	5% max. of set distance
Light source (wavelength)			Red LED (624 nm)	Red LED (650 nm)
Power supply voltage			10 to 30 VDC (including 10% ripple (p-p)), Class2
Current consumption			35 mA max.
Input/ output	Control output		Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max. (Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.) Open-collector output (NPN/PNP output depending on model)
		NPN	OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)
		PNP/COM3	OUTPUT 1: NO (Normally open)/COM[], OUTPUT 2: NC (Normally closed)
Response time			Operate or reset: 1 ms max.
Threshold setting method			Teaching method/IO-Link communications
Ambient illumination			Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.

Common to E3AS-HL/F/L series

Series		E3AS-HL	E3AS-F	E3AS-L
Protection circuits		Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Ambient temperature range		Operating: -10 to 50°C, Storage: -25 to 70°C (with no icing or condensation)	Operating: -20 to 55°C, Storage: -40 to 70°C (with no icing or condensation)	Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range		Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance		20 MΩ min. at 500 VDC
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min
Vibration resistance		10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IP67 (IEC60529) and IP67G *1 (JIS C 0920 Annex 1), IP69K (ISO20653)
Indicators		OLED Display (White), Power/Communication indicator (Green), Operation indicator (Orange) IO-Link Communication mode: blinking	Operation indicator (orange), Stability & Communication indicator (green) IO-Link Communication mode: blinking
Connection method		Pre-wired (standard cable length: 2 m), M8 Connector, M12 Pre-wired Smartclick Connector (standard cable length: 0.3m)
Weight (packed state/ Sensor only)	Pre-wired (2 m)	Approx. 180 g/ approx. 110 g	Metal case type: Approx. 135 g/approx. 90 g Plastic case type: Approx. 115 g/approx. 70 g	Approx. 135 g/ approx. 90 g
	M8 Connector	Approx. 120 g/ approx. 50 g	Metal case type: Approx. 75 g/approx. 30 g Plastic case type: Approx. 60 g/approx. 15 g	Approx. 75 g/ approx. 30 g
	M12 Pre-wired Smartclick Connector (0.3m)	Approx. 150 g/ approx. 80 g	Metal case type: Approx. 95 g/approx. 50 g Plastic case type: Approx. 75 g/approx. 30 g	Approx. 95 g/ approx. 50 g
Materials	Case	Stainless steel (SUS316L)	Metal case type: Main unit/mounting part/ connector part Stainless steel (SUS316L) Plastic case type: Main unit Polybutylene terephthalate (PBT) /polycarbonate (PC), Mounting part/connector part Nickel-plated brass	Stainless steel (SUS316L)
	Lens cover and Display	Methacrylic resin (PMMA) (Lens cover: Antifouling coating)
	Indicator	Polyamide 11 (PA11)	Metal case type: Polyamide 11 (PA11) Plastic case type: Polyethersulfone (PES)	Polyamide 11 (PA11)
Main IO-Link functions		Operation mode switching between NO and NC, execution of teaching (2-point teaching, Background teaching), setup of the threshold, timer function of the control output and timer time selecting, Restore Factory Settings, Key Lock (Unlock, Lock, Lock (No Button)), monitor output* (Detection level, Incident light level) * Only for E3AS-HL and E3AS-F
IO-Link Communication specifications	IO-Link specification	Ver. 1.1
	Baud rate	COM3 (230.4 kbps)
	Data length	PD size: 4 bytes, OD size: 1 byte (M-sequence type: TYPE_2_V)		PD size: 1 byte, OD size: 1 byte (M-sequence type: TYPE_2_1)
	Minimum cycle time	COM3: 1.2 ms
Accessories		Instruction manual, compliance sheet, index list (attached for IO-Link type only) E3AS-HL: FDA certification label and Warning label E3AS-F: FDA certification label Note: Mounting Brackets must be ordered separately.

*1. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance
to oil.

last update: October 1, 2024

Top of page

E3AS-HL / F / L Series

E3AS Series changes the “way of using” reflective photoelectric sensors

E3AS-HL

E3AS-F

E3AS-L

Common to E3AS-HL/F/L series

Product Category