Page top

Industrial Automation

Industrial Automation

E3F3

Photoelectric Sensor

E3F3

Threaded Cylindrical Photoelectric Sensor with Built-in Amplifier for Use as an Optical Proximity Sensor High Noise-immunity with Photo-IC Technology

Sensing method Through-beam Retroreflective Diffuse reflective
NPN output E3F3-T11 E3F3-R11 E3F3-R12 E3F3-D11 E3F3-D12
E3F3-T16 E3F3-R16 E3F3-R17 E3F3-D16 E3F3-D17
E3F3-T61 E3F3-R61 E3F3-R62 E3F3-D61 E3F3-D62
E3F3-T66 E3F3-R66 E3F3-R67 E3F3-D66 E3F3-D66
PNP output E3F3-T31 E3F3-R31 E3F3-R32 E3F3-D31 E3F3-D32
E3F3-T36 E3F3-R36 E3F3-R37 E3F3-D36 E3F3-D37
E3F3-T81 E3F3-R81 E3F3-R82 E3F3-D81 E3F3-D82
E3F3-T86 E3F3-R86 E3F3-R87 E3F3-D86 E3F3-D87
Sensing distance 5 m 3 m (Non-
polarized when
using E39-R1)
2 m (Non-
polarized when
using E39-R1)
100 mm 300 mm
Standard sensing
object
Opaque object:
11 mm min.
Opaque object: 56 mm min. 100 × 100 mm white mat paper
Hysteresis --- 20% max. of sensing distance
Light source
(wavelength)
Infrared LED
(860 mm)
Red LED (680 mm) Infrared LED (860 mm)
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption 45 mA max. (light
source and
receiver)
25 mA max.
Control output Open collector transistor output, 100 mA max., residual voltage: 1 V max. at 100 mA
Protective circuit Output short-circuit protection, DC power supply reverse polarity protection
Response time 1.0 ms max.
Sensitivity adjustment --- Single-turn
adjuster
Ambient illumination Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature Operating: -25 to 55 °C (with no icing or condensation)
Storage: -30 to 70 °C (with no icing or condensation)
Ambient humidity Operating: 45% to 85% (with no condensation)
Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between current carry parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
Vibration resistance
(destruction)
10 to 55 Hz, 1.5-mm double amplitude for 1 hour each in X, Y, and Z directions
Shock resistance
(destruction)
500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP66
Connecting method Pre-wired (standard length: 2 m)/M12 connector
Indicators Operation indicator (orange) [Power indicator of emitter (orange)]
Weight Pre-wired Metal: 200 g max. Metal housing: 100 g max.
Plastic: 170 g max. Plastic housing: 85 g max.
M12
connector
Metal: 120 g max. Metal housing: 60 g max.
Plastic: 40 g max. Plastic housing: 20 g max.
Packing Nylon bag
Material Case Plastic: ABS, Metal: Nickel-brass
Lens PMMA
Accessories Screw nuts: ABS or Nickel-brass
Accessories Screw nuts (4),
Instruction sheet
Screw nuts (2), E39-R1 reflector,
Instruction sheet
Screw nuts (2),
Instruction sheet
Screw nuts (2),
Instruction sheet,
Adjusting driver