ZR-RX25

Item			ZR-RX25A-[]
Input method			All channels isolated input
Input terminal shape			M3 screw type terminal
Number of analog input channels			10 ch
Sampling speeds			10 ms (when 1 ch is used) to 1 h
A/D resolution			16 bit
A/D conversion system			Delta-sigma
Measure- ment ranges	Voltage		20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50 V, 1-5 V F.S.
	Temper- ature	Thermocouple	K, J, E, T, R, S, B, N, W (WRe5-26)
		Resistance temperature detector	-
	Humidity		0% to 100% (Voltage 0 to 1 V scaling conversion) *1
External input/ output sections	Digital input		Logic input (4 ch) or Pulse input (4 ch) *2 *3
	Alarm output		4 ch (Open collector output)
Functions	Trigger functions		External trigger input (1 ch), Input signal level, time, duration
	Filter functions		Off, 2, 5, 10, 20, 40 (moving average)
	Calculation function		Statistical calculation *4: Average, peak, maximum, minimum, RMS (maximum of 2 can be set simultaneously)
PCI/F	Type		USB1.1 (FULL SPEED)
	Function	Ethernet functions	-
		USB	Realtime data transfer to the PC
Memory devices	Internal		Flash memory: approx. 4 GB *5
	External		USB memory *5
Display			4.3-inch color LCD (WQVGA: 480 × 272 dots)
Operating environment			0 to 45°C, 5% to 85% (0 to 40°C when operated on batteries, 15 to 35 °C when charging batteries)
Vibration resistance			Equivalent to automobile parts Type 1 Category A classification
PoWer supply			AC adaptor: AC100 to 240 V/50 to 60 Hz *6, DC drive: 8.5 V to 24 V, Battery: DC7.4 V
PoWer consumption			29 VA (When the AC adaptor is used)
Weight			approx. 520 g (Excluding battery and AC adaptor)
External dimensions			194 × 117 × 42 mm
Accessories			User's Manual, Utility disk (CD-ROM), AC Adaptor/AC cable

*1. Resistance temperature detector is non-isolated.
*2. A humidity sensor ZR-XRH1 is necessary.
*3. A logic alarm cable ZR-XRL1 is necessary.
*4. Pulse input: Revolutions mode/Counts mode/Inst. mode switch method
*5. Designate real-time or between-cursors mode (during playback)
*6. 1 file max. 2GB (The capacity will vary depending on the external memory used.)
*7. Be sure to use only the AC cable and AC adaptor provided as accessories.

Item	ZR-RX25A-[]
Voltage	±0.1% of F.S.
Temperature *1	Thermocouple	Measurement Temperature Range (°C)	Measurement accuracy
	R/S	0 ≤ TS ≤ 100	±5.2°C
		100 < TS ≤ 300	±3.0°C
		R: 300 < TS ≤ 1600	±(0.05% of rdg + 2.0°C)
		S: 300 < TS ≤ 1760	±(0.05% of rdg + 2.0°C)
	B	400 ≤ TS ≤ 600	±3.5°C
		600 < TS ≤ 1820	±(0.05% of rdg + 2.0°C)
	K	-200 ≤ TS ≤ -100	±(0.05% of rdg + 2.0°C)
		-100 < TS ≤ 1370	±(0.05% of rdg + 1.0°C)
	E	-200 ≤ TS ≤ -100	±(0.05% of rdg + 2.0°C)
		-100 < TS ≤ 800	±(0.05% of rdg + 1.0°C)
	T	-200 ≤ TS ≤ -100	±(0.1% of rdg + 1.5°C)
		-100 < TS ≤ 400	±(0.1% of rdg + 0.5°C)
	J	-200 ≤ TS ≤ -100	±2.7°C
		-100 < TS ≤ 100	±1.7°C
		100 < TS ≤ 1100	±(0.05% of rdg + 1.0°C)
	N	0 ≤ TS ≤ 1300	±(0.1% of rdg + 1.0°C)
	W	0 ≤ TS ≤ 2000	±(0.1% of rdg + 1.5°C)

*1. Operating environment 23°C±5°C;
       When 30 minutes or more have elapsed after power was switched on Sampling 1 s/Filter ON (10 times)
       GND connected
       Thermocouple used is T: 0.32 dia., others: 0.65 dia.

Item	Description
Allowable temperature range	-25 to 80°C
Allowable humidity range	0% to 100%
Relative humidity measurement accuracy	±3% (5% to 98% at 25°C)
Response time	15 sec (90% response when membrane filter installed)
Sensor output	0 to 1 VDC
External dimensions	dia. 14 mm × 80 mm (excluding cable)
Cable length	3 m

Item	Special PC software ZR-SX10	Standard PC software
	Wave Inspire RX (Since Ver.2.4) (Option Specifications)	Smart Viewer RXW (Since Ver.2.0) (Standard accessories
Compatible logger	ZR-RX25/RX45/RX70/RX20/RX40	ZR-RX25/RX45/RX20/RX40
Compatible operating system	Windows XP/Windows Vista/Windows 7
CPU	Intel-compatible, 1 GHz or faster processor recommended, Intel Atom CPU not supported	Pentium 4: 2.0 GHz or faster processor recommended, Intel Atom CPU not supported
Memory	Windows XP: 512 MB or more Windows Vista/Windows 7: 1 GB or more	512 MB or more (recommended: 1 GB or more)
Display	1024 × 768 or higher, screen resolution, 65,535 color (16-bit color) or higher screen display	1024 × 768 or higher screen resolution
Compatible interface	USB, LAN
Standard functions	Review saved data, real-time capture of PC data, main unit setup, CSV file conversion
Waveform operation	Direct operation of waveform by mouse or icons, Batch processing of selected waveform	Change CH scales individually by icons
Waveform display	Display graphs in multi-window, X-Y View, FFT View, Handy function of switching waveform, Display function of grouping channel, Scrolling for all directions (up, down, right, left)	Display in single window, X-Y View between Cursors (only during replay), Display function of grouping channel
Configuration function	-	Channel grouping fuction, Main unit setup
External control of sampling	Advanced channel grouping function, Advanced Listview setup function, Main unit setup	Available (can set and display)
Captured data	Binary file (original format): Captured data and the information of graph window are saved. CSV file: Captured data is saved in comma-separated value format: Binary files can be converted to CSV files all at once
Others	Cursor function, Comment Input function, Excel transfer function

*1: Even when using a PC with adequate specifications, capture errors occur at times because the PC is in bad condition.
       (For example, when other applications are open, or recording medium has no free area.) When you capture data
       using this software, please close all the other applications and save captured data to the hard disk.
*2: Don’t start up other applications while this software is operating, and don’t perform multiple operations. (For
       example, screen saver, virus scan program, copying and moving files, searching files, etc.)