Page top

Industrial Automation

Industrial Automation

E3ZM-V

Color Mark Detection Compact Photoelectric Sensor

E3ZM-V

Color Mark Detection in a World-standard Size (11 × 21 × 32 mm), with High-speed Response (50 μs) and Accuracy in Spite of Sensing Object Movement

Sensor

Sensing method Appearance Connection method Sensing distance Model
NPN output PNP output
Mark Sensor
(Diffuse reflective)
Pre-wired (2 m) 12±2 mm *
(White light)
E3ZM-V61 2M E3ZM-V81 2M
Connector (M8, 4 pins) E3ZM-V66 E3ZM-V86

* A deviation of ±2 mm (typical value) can be handled for combinations of white, yellow, and black. Refer to Data Sheet
  for the detection capability for other color combinations.

Accessories

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size Cable Appearance Cable type Model
M8 (4 pins) Standard Straight *1
2 m 4-wire XS3F-E421-402-A
5 m XS3F-E421-405-A
L-shaped *1 *2
2 m XS3F-E422-402-A
5 m XS3F-E422-405-A

Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is SUS316L, and the degree of protection
          is IP67. When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

Mounting Brackets

A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.

Appearance Model
(Material)
Quantity Remarks Appearance Model
(Metal
material)
Quantity Remarks
E39-L153
(SUS304) *1
1 Mounting Brackets
E39-L98
(SUS304) *2
1 Protective Cover Bracket
E39-L104
(SUS304) *1
1
E39-L150
(SUS304)
1 (Sensor adjuster)
Easily mounted to the aluminum
frame rails of conveyors and
easily adjusted.
For vertical angle adjustment
E39-L43
(SUS304) *2
1 Horizontal Mounting
Brackets
E39-L151
(SUS304)
1
E39-L142
(SUS304) *2
1 Horizontal Protective
Cover Bracket
E39-L44
(SUS304)
1 Rear Mounting Bracket
E39-L144
(SUS304) *2
1 Compact Protective Cover
Bracket

Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
       Connector models.
*2. Cannot be used for Standard Connector models.