Page top

Industrial Automation

Industrial Automation

CS1W-LCB01 / LCB05

Loop Control Boards

CS1W-LCB01 / LCB05

By combining function blocks, a wide array of control methods, from basic PID control to cascade and feed-forward control can be easily configured.

General Specifications

Item Specifications
Name Loop Control Boards
Unit classification CS-series Inner Boards
Model number CS1W-LCB01:
Standard Inner Board
CS1W-LCB05(-GTC):
Special Inner Board
LCB05D:
Duplex Inner Board
Applicable CPU Units CS1G/H-CPU[][]H
CS1D-CPU[][]S/SA
(See note 1.)
CS1G/H-CPU[][]H
CS1D-CPU[][]S/SA
(See note 1.)
Built into the CS1D-CPU6[]P.
Mounting location Inner Board slot in CPU Unit
Number of Boards/Units 1 Board max. per CPU Unit
Data
exchange
with CPU
Unit
I/O memory User Link Tables: ITEM data for function blocks can be allocated in any part of I/O memory
(CIO, WR, HR, or DM Areas, or EM Area bank 0).
All data HMI function used to allocate function block ITEM data for Control, Operation, and External
Controller blocks in the specified bank of the EM Area in the CPU Unit. (Default: Bank 0)
Setting switches None
Indicators 3 LEDs: RUN, ready, and communications port send/receive
Front panel connections RS-232C port x 1 (The CS1D-LCB05D cannot be used to connect to the ES100X
Controller.)
Data backup By super capacitor: All function block data (including sequence tables and step ladder
instructions)
Battery /capacitor life 24 hours at 25°C (life shortened by use at higher temperatures)
Data storage in flash
memory
Function block data (RAM data backup and recovery can be performed whenever necessary.)
Error log data
Effect on CPU Unit
cycle time
0.8 ms max. 25 ms max.
(See note 2.)
Current consumption
(supplied from Power Supply Unit)
220 mA at 5 V DC (Increased by 150 mA when NT-AL001-E Link Adapter is used.)
Dimensions 34.5 × 130 × 100.5 mm (W × H × D)
Weight 100g max.
Standard accessories None

Note: 1. A Loop Control Board Unit Ver. 1.5 or later is required for use. Do not use a Loop Control Board with a unit version earlier than 1.5.
Note: 2. During duplex initialization: 2.1 s max.