Page top

Industrial Automation

Industrial Automation

Peripheral Devices

EtherCAT junction slaves and connector products.EtherCAT junction slaves, Switching Hubs and Cabels.

Peripheral Devices List

There are 774 products of Peripheral Devices.

3G3MX2-V2 Multi-function Compact Inverter 3G3MX2-V2

Provides rich features, including simple positioning and PM motor control, for a variety of applications

3Z4S-LE SV-V Series Lens for C-mount Cameras 3Z4S-LE SV-V Series

Standard CCTV lens. Lower distortion and higher resolution than previous CCTV lenses.

61F-WL Water Leak Detector 61F-WL

Set Sensitivity Freely to Suit the Liquid to Detect

A22LK Guard Lock Safety Key Selector Switch A22LK

The guard lock prevents accidental mode changes.

A22NE-PD / A22NE-P / A22E Emergency Stop Pushbutton Switches (22-dia. or 25-dia.) A22NE-PD / A22NE-P / A22E

Install in 22-dia. or 25-dia. Panel Cutout (When Using a Ring)

A22NK Key-type Selector Switches A22NK

22-mm dia. Key-type Selector Switches. Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring.

A30NN / A30NL Pushbutton Switches A30NN / A30NL

30-mm dia. Pushbutton Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring. Workability and safety improvements.

A7D / A7DP Thumbwheel Switch A7D / A7DP

Ultra-small, Low-cost, Push-operated Switches

Automation Control Environment (ACE) Software Automation Control Environment (ACE)

ACE is a PC-based software package that easily manages Omron’s entire portfolio of robots, controls, vision, and feeding systems

ACE software is available to download from the Omron US website.

CJ1W-CIF11 SYSMAC Option RS-422A Converter CJ1W-CIF11

The RS-232C port of the SYSMAC series can be changed into RS-422A/485 port.

CJ1W-CRM21 CJ-series CompoNet Master Units CJ1W-CRM21

NJ/CJ-series CompoNet Master Units Increase the Range of Applicability of Sensors and Actuators.

CJ1W-ECT21 CJ-series EtherCAT® Slave Unit CJ1W-ECT21

Hi-speed I/O link based on EtherCAT

CJ1W-ID / IA CJ-series Input Units CJ1W-ID / IA

A wide range of CJ series input units are available featuring high-speed input and suitability for various applications. This unit is available for CJ/NJ controllers.

CJ1W-PA / PD CJ-series Power Supply Unit CJ1W-PA / PD

Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W).

CJ2 CJ2 Overview CJ2

Introducing the Flagship CJ2 CPU Units, with Built-in Multifunctional Ethernet Port.

CompoNet Peripheral Devices CompoNet Peripheral Devices CompoNet Peripheral Devices

Communications Cables, Terminating Resistance, Connector, Mounting Bracket, Special Tools

CompoNet Open Network for High-Speed Control CompoNet

CompoNet offers the ideal mix of high speed, ample capacity, and ease-of-use needed to let you build the best machine.

CP2E CP series CP2E CPU Unit CP2E

Micro PLC designed to support data collection and Machine to Machine communication

CRS1-RPT01 Repeater Unit CRS1-RPT01

Simple and Intelligent Repeater Units Extend the Network

CRT1B-[]D02JS(-1) / []D04JS(-1) Bit Slave Units with Compact Connectors CRT1B-[]D02JS(-1) / []D04JS(-1)

Bit slave of smallest class in industry Innovation in wiring for any type of machinery

CRT1-VAD04[][] / VDA02[][] Analog I/O Slave Units with MIL Connectors/e-CON Connectors CRT1-VAD04[][] / VDA02[][]

Analog Slave Units with the Industry's Narrowest Width Help Save Space in Equipment and Panels

CS1G, CS1H CS1G, CS1H Overview CS1G, CS1H

From Machine Control to Information Management Multiple-application Controllers with a Wide Range of Functions

CS1W-PTS SYSMAC CS-series Process Analog I/O Units CS1W-PTS

Provides the functionality of isolators, power supplies, signal converters, and other devices.

D4ER-[]N Oil-resistant Limit Switch D4ER-[]N

Even Better Oil Resistance Than D4E-N Switches

D4N Safety Limit Switch D4N

Popular Safety Limit Switches Providing a Full Lineup Conforming to International Standards

D4NS, D4NS-SK Safety-door Switch D4NS, D4NS-SK

Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch

D5A High-precision Switch D5A

High-precision Switch for Detecting Micron-unit Displacement

D5B Mechanical Touch Switch D5B

Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics

DCN4-[][]4D Flat Cable Connector DCN4-[][]4D

Easy connection. Now operational 30x faster than before.

DeviceNet Multi-vendor Network DeviceNet

DeviceNet is a standardized network that enables intelligent control of field devices and improves system productivity.

DRT1-COM Communications Unit DRT1-COM

Connects to a Total Maximum of Eight Digital I/O, Analog I/O, and Relay Output Units Compatible with MULTIPLE I/O TERMINAL.

DRT2-[]D08(-1) / []D16(-1) Transistor Remote I/O Terminals DRT2-[]D08(-1) / []D16(-1)

Allows I/O Expansion with Transistor Terminals

E2E NEXT Proximity Sensor E2E NEXT

Enables easier and standardized designs previously not possible. IO-Link as a standard feature

E2K-C Long-distance type E2K-C

Long-distance Capacitive Sensor with Adjustable Sensitivity

E2NC Smart Proximity Sensor E2NC

Smart Proximity Sensor with Separate Amplifier Enables Easily Making Highprecision Sensitivity Settings.

E32-LT11N / LD11N / LR11NP Hex-shaped Fiber Unit E32-LT11N / LD11N / LR11NP

Fiber Units with Build-in Lenses provide more stable detection and simpler, more reliable installation.

E39-L93[] / L150 / L151 / L98 Sensor Adjuster, Cover Fittings E39-L93[] / L150 / L151 / L98

Easy to Adjust for the Required Application with a Broad Range of Variations

E3AS Series Distance-settable Photoelectric Sensor E3AS Series

E3AS Series changes the “way of using” reflective photoelectric sensors

E3JK (NEW) Built-in Power Supply Photoelectric Sensor E3JK (NEW)

Long-distance Photoelectric Sensor That Supports AC/DC Power Supplies

E3NC Smart Laser Sensors E3NC

Ideal for Applications That Cannot Be Handled with Fiber Sensors or Photoelectric Sensors

E3NW Sensor Communications Unit E3NW

The Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation

E3X-ZV / MZV Smart Fiber Amplifier Units E3X-ZV / MZV

Solidly Stable Presence/Absence Detection at an Amazing Price

E4C-UDA Digital Amplifier Ultrasonic Sensor E4C-UDA

Compact, Cylindrical Reflective Ultrasonic Sensor with Easy Setting

E4PA-N Ultrasonic Displacement Sensor E4PA-N

Now, more advanced with a new mutual interference prevention function.

E5C2 Temperature Controller E5C2

DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting

E5CD / E5CD-B Digital Temperature Controller (48 x 48 mm) E5CD / E5CD-B

48 x 48 mm. Optimize Control by Detecting Status Changes. Easily Satisfy Both Productivity and Quality.

E63-WF Direct Discrimination Unit E63-WF

Detects the Rotary Encoder Direction

E69-[] Rotary Encoders Accessories E69-[]

Couplings, Flanges and Servo Mounting Brackets

E9NC-AA / VA IoT Status Monitoring Amplifier E9NC-AA / VA

IoT Status Monitoring Amplifiers for General-purpose Analog Outputs Are Connectable to Various Sensors

EE-[] Photomicro Sensors Accessories EE-[]

Connectors and Connector Hold-down Clips

EE-SPW311 / 411 Long-distance Through-beam Photomicrosensor EE-SPW311 / 411

Through-beam Photomicrosensor with a sensing distance as long as 1 m.

EE-SPX301 / 401, EE-SPY30 / 40 Slot-type Reflective Photomicrosensor EE-SPX301 / 401, EE-SPY30 / 40

Photomicrosensor with light modulation is not influenced by external light.

EE-SPX613 Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier EE-SPX613

Liquid Level Photomicrosensor with operation mode and sensitivity selectors for easy application.

EE-SPY31 / 41 Light Convergent Reflective Photomicrosensor EE-SPY31 / 41

Accurately detects objects placed in front of shiny Background.

EE-SPZ-A Retroreflective Photomicrosensor with Lens EE-SPZ-A

Photomicrosensor with light modulation for reduced external light interference.

EE-SX95 Ultra-compact Pre-wired Photomicrosensor (Non-modulated) EE-SX95

Meeting Customer Needs with Ultracompact Sensors that Mount with M3 Screws

EJ1 Modular Temperature Controller EJ1

Implement a Multi-Point Control System Easily with Space Saving and Wire Saving by Connecting Modules

EQ100-E Sensor Network Server EQ100-E

Easily installable and variously connectable sensor network server.

EQS-AD10-E EQ-ANDON EQS-AD10-E

The measured data at each device collected and accumulated by the EQ100 can be unitarily compared,analyzed, and monitored by using EQ-ANDON.

ES2-HB-N / THB-N Humidity Sensor, Temperature/Humidity Sensor ES2-HB-N / THB-N

Detect Humidity within an Accuracy of ±3% in a Compact Body. Controller Set Provides Superior Humidity Control and Temperature/ Humidity Control.

EtherCAT EtherCAT Overview EtherCAT

Network Solutions for Control Automation Technology. Achieving "high-speed and high-precision" machine control through the world's highest level network solution

F3W-E Picking Sensor F3W-E

Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts.

FH-SMD 3D Robot Vision System FH-SMD

A complete solution for automating human-intensive part picking

FLV Series Light Units FLV Series

Ring Light, Bar Light and Spot Light. Light Series Approx. 200 Models.

G2RV-ST Slim I/O Relay G2RV-ST

Slim I/O relay realizes space saving thanks to high-density mounting and ultra-slim body

G3J-T-C Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output G3J-T-C

New Models with AC Power Supply Input and Monitor Output Equivalent to Non-contact SPST-NO Join the G3J-T Series

G3PJ Solid State Relays for Heaters G3PJ

Our Value Design Products Increase the Value of Your Control Panels. Single-phase SSR for low heat generation enables carrying 25 A (G3PJ-[]25B(-PU)) even for close mounting of three SSRs to contribute to downsizing of control panels. Models available with push-in input terminals.

G3PW Single-phase Power Controller G3PW

High-precision Control with Easy Setup

G3RV-ST Slim I/O Solid State Relay G3RV-ST

Slim I/O SSR realizes space saving thanks to high-density mounting and ultra-slim body

G4Q Ratchet Relay G4Q

Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation

G6D-F4PU / G3DZ-F4PU, G6D-F4B / G3DZ-F4B Terminal Relay G6D-F4PU / G3DZ-F4PU, G6D-F4B / G3DZ-F4B

Model with Push-In Plus technology Added to Terminal Relays with Four-point Output Lineup

G70V I/O Relay Terminal G70V

Our Value Design Products Increase the Value of Your Control Panels. I/O Relay Terminals with 16 Points and Push-In Plus terminal blocks to Downsize Control Panels and Save Labor.

G7SA Relays with Forcibly Guided Contacts G7SA

Compact, Slim Relays Conforming to EN Standards

G9SA Safety Relay Unit G9SA

Proven and popular safety relay units Output expansion, DC power supply, and AC power supply models

G9SP Safety Controller G9SP

Easy programming for complex safety control

GQ-CRM21 CompoNet Gateway Unit for CC-Link GQ-CRM21

"Easy" and "Flexible" system expansion with linked CC-Link and CompoNet

GX-JC03 / JC06 EtherCAT Junction Slave GX-JC03 / JC06

Realizing flexible wiring solutions

H3DT-N / -L Multi-range, Multi-mode Timer H3DT-N / -L

Our Value Design Products Increase the Value of Your Control Panels. Multiple time ranges and operating modes let you cover a wide range of applications.

H3FA Solid-state Timer H3FA

DIP Model Timer for PC Board Use Provides Contact and Solid-state Output

H5CC Digital Timer H5CC

New and improved design for easier use, programming, maintenance and user feedback. The improved user interface is intuitive and offers better overall visibility. Replacement time notification function notifies the user of potential preventive maintenance.

H5S Digital Time Switch H5S

Easier, More Convenient Time Switches, with New 4-circuit Output and Yearly Models in Addition to 2-circuit Weekly Models

H7CC-A Digital Counter H7CC-A

New and improved design for easier use, setting and maintenance. The improved user interface is intuitive and offers better overall visibility. Replacement time notification function notifies the user of potential preventive maintenance

H8BM-R Multi-maintenance Counter/Timer (DIN 72 x 72) H8BM-R

Nine Built-in Counters/Timers to Measure Equipment Operating Cycles and Times and Forecast Maintenance Timing

H8PS Cam Positioner H8PS

This Compact Cam Positioner, Popular for Its Ease-of-use, Now Comes with Even Better Functions.

i4L SCARA Robot i4L

New i4L robot for precision machining, assembly, and material handling

ACE software is available to download from the Omron US website.

iPF Series Flexible Part Feeder iPF Series

High-performance, flexible part feeding solution providing plug-and-play integration with OMRON Industrial Robots, Vision Systems, and ACE software.

iX3 Parallel Robots EtherCAT (NJ501-R) version iX3

Parallel robot ideal for use in the food and beverage, pharmaceutical, and healthcare industries

ACE software is available to download from the Omron US website.

K3HB-H Temperature Indicator K3HB-H

New High-speed, High-precision Temperature Indicator

K3HB-R Rotary Pulse Indicator K3HB-R

Digital Rotary Pulse Meter Capable of 50 kHz Measurements

K3HB-V Weighing Indicator K3HB-V

An Ideal Indicator for OK/NG Judgements in Automated and Picking Machines, Measuring Factors such as Pressure, Load, Torque, and Weight Using Load Cell Signal Input.

K3HB-X Process Indicator K3HB-X

A Process Indicator Ideal for Discriminating and Displaying Measurements for Voltage/Current Signals

K7DD Advanced Motor Condition Monitoring Device K7DD

Implementing predictive maintenance with real-time condition monitoring of variable speed motors

K8DT-AS Single-phase Current Relay K8DT-AS

Our Value Design Products Increase the Value of Your Control Panels. Detect errors in motors and other equipment through current changes. Use in either overcurrent or undercurrent mode.

KE1 Smart Measurement and Monitor Units KE1

First in the Industry! Unit structure that enables Power and Earth Leakage Monitoring with just one Unit. Use just one Unit to implement multi-circuit measurements.

LD / MD / HD Series Autonomous Mobile Robots LD / MD / HD Series

Designed to automate material transport tasks in factories and indoor facilities.

LVS-9510 Series Code Verification System LVS-9510 Series

Desktop Barcode Verification System

MX-Z2000H-V1 Series Fiber Laser Marker MX-Z2000H-V1 Series

Great for either deep or shallow engraving in metals, marking on plastics/resins or plastic films, and for fine processing. Mark anything from electronic parts to automotive parts.

NE1A-SCPU Series Safety Network Controller NE1A-SCPU Series

Achieve Safety Control through Programming.

NJ NJ Overview NJ

Motion, Logic, Safety, Vision and HMI in one

NJ-PA / PD NJ-Series Power Supply Unit NJ-PA / PD

Powerful power supply unit to supply stable power to the NJ-series controller.

NX7 NX7 Overview NX7

Motion, Logic and Vision in one

NX701-[][][][] NX-Series NX701 CPU Units NX701-[][][][]

Ideal for large-scale, fast, and highly-accurate control with up to 256 axes.

NX-EIP201 NX-series EtherNet/IP(TM) Unit NX-EIP201

[For NX502] EtherNet/IP unit with two 1 Gbps ports for high-speed, high-capacity communications

NX-HTC NX-series Advanced Temperature Control Units NX-HTC

Combining Space-Saving Design and Advanced Temperature Controllability

NX-PA / PD NX-Series Power Supply Unit NX-PA / PD

Powerful power supply unit to supply stable power to the NX-series controller.

PS-[]S(R) / -31 Electrode Holder PS-[]S(R) / -31

Separate Electrode Holders for Water Supply and Drainage Control in Buildings. Small, Lightweight Electrode Holders for Use as Built-in Components.

PYF-[][]-PU / PTF-[][]-PU / P2RF-[][]-PU Sockets with Push-In Plus technology PYF-[][]-PU / PTF-[][]-PU / P2RF-[][]-PU

Our Value Design Products Increase the Value of Your Control Panels. Sockets with Push-In Plus technology to Save Work Added to Series for MY, LY and G2R-S Relays.

R6Y3 Delta robot R6Y3

Pick and Place Solution. The fastest picking system integrated in the Sysmac platform

R89F-M AC Free Input Axial Fans R89F-M

Reducing required design work through unified power supply voltage

S3D2 Sensor Controller S3D2

Offers High-speed Input Response of 0.1 ms and Equipped with Built-in Timer

S8BA Uninterruptible Power Supply (UPS) S8BA

DC-DC type small UPS mounts on a DIN rail to provide an ideal countermeasure for momentary power losses and power failures in industrial computers (IPC) and controllers.

S8V-CP DC Electronic Circuit Protector (24 VDC 4 Outputs/8 Outputs Type) S8V-CP

Simplified safety design of DC circuits Reliable DC circuit protection in the event of short circuits or overcurrent Saves space even with multi-channels Sequential start-up of outputs to avoid start-up trouble

S8VK-WA Switch Mode Power Supply (240/480/960/2000-W Models) S8VK-WA

200 V Three-phase Input Power Supplies A solution to three-phase balance problems

SC Limit Switch Connectors SC

Connectors for Limit switches to secure watertightness of the edges of the conduits.

SmartController EX Robot Controllers SmartController EX

High-performance robot motion controller capable of high-speed processing

ACE software is available to download from the Omron US website.

STC Series (Camera Link CMOS) Camera Link CMOS STC Series (Camera Link CMOS)

High Speed CMOS Camera Link Series

STC Series (CoaXPress) CoaXPress STC Series (CoaXPress)

High Speed CMOS CoaXPress Camera

STC Series (GigE Vision Small CMOS Camera) GigE Vision Small CMOS Camera STC Series (GigE Vision Small CMOS Camera)

PoE-compatible GigE Vision camera with high-resolution, high-speed CMOS sensor

STC Series (TV Format Color Camera) TV Format Color Camera STC Series (TV Format Color Camera)

1/3.2" 0.65 Mpix TV format color CMOS camera

STC-FDR Factory Drive Recorder STC-FDR

Record the moment of an event

Sysmac Studio Ver.1.[][] Automation Software Sysmac Studio Sysmac Studio Ver.1.[][]

Provides an integrated development environment for NJ/NX/NY-series Controllers. With its intuitive user interface, integrates programming, test and debug of logic, motion, safety and vision sensors and achieves an advanced security function.

TL-L Ultra-long Sensing-distance Proximity Sensor TL-L

Detection Distance of 100 mm for Both Ferrous and Non-ferrous Substances.

TM S Series OMRON TM Collaborative Robot, S Series TM S Series

S Series Collaborative Robot (Cobot) for assembly, palletizing, inspection, logistics and many other applications

TP70 On-site Flexible Rod Switch TP70

Easy on-site input on-the-move

V640 Series RFID System (Conforms to SEMI standard, Electromagnetic Inductive 134 kHz) V640 Series

Line-up Ethernet I/F model newly. RFID system for Semiconductor applications, supports reading and writing TI (Texas Instruments) transponders

VB Multiple Limit Switch VB

A New Monoblock Multiple Limit Switch Incorporating a Head Box with a Tough Head and Ensuring High Sealing Performance and a Mechanical Durability of 5,000,000 Operations

Viper Articulated Robots Viper

Articulated robot for machining, assembly, and material handling

ACE software is available to download from the Omron US website.

VT-S1080 PCB Inspection System VT-S1080

Innovating manufacturing through Omron advanced inspection technology

W4S1-05D Industrial Switching Hub W4S1-05D

Easy and reliable way to adopt IoT for production sites

WL-N / WLG Two-circuit Limit Switch WL-N / WLG

Two-circuit limit switches that can be selected to match the operating environment and application WL-N/Basic models, WLG/High-sensitivity and High-precision models

WS02-CFDC1, 3G8E2-DRM21-V1 DeviceNet Configurator WS02-CFDC1, 3G8E2-DRM21-V1

Easily Build and Maintain Multi-vendor DeviceNet Networks.

XS5 NEXT Series Round Oil-resistant Connectors (M12 Smartclick) XS5 NEXT Series

Round Oil-resistive Smartclick Connectors, that are Resistant to Oil, and that Reduce Installation Work

XW2K Ultra-Compact Interface Wiring System XW2K

The Industry’s Smallest*1 Compact Interface Wiring System to Reduce Work and Save Space on Control Panels. *1. Results of OMRON survey conducted in March, 2022

XW6T Common Terminal Blocks with Visible Indicators XW6T

Our Value Design Products Increase the Value of Your Control Panels. Contributing to downsize control panels and save work. It can proper wiring without skillful operators, because of indicators make wiring completion simply visible.

XWT-[]D08(-1) / []D16(-1) Expansion Units XWT-[]D08(-1) / []D16(-1)

Expansion I/O Units make expansion easy!

Z General-purpose Basic Switch Z

Best-selling Basic Switch Boasting High Precision and Wide Variety

ZAP Pushbutton Switch (Cylindrical 30-dia.) ZAP

Long Service Life with Built-in Z-series Basic Switch

ZEN V2 Programmable Relay ZEN V2

Even Broader Applications with Increased Functionality and Higher Precision

ZG2 Smart Sensor (2D Measurement Sensor) ZG2

2D Laser Profile Measurement System. ZG2 debut! Achieving stable measurement through innovative technology.

ZJ-FW Fan Ionizer (Area fan type) ZJ-FW

3 slim, lightweight types to choose from. Easy installation.

ZN-A Air Clean Units ZN-A

The ZN series is even thinner and sports improved air volume. These products enable cleaning that is both fast and flexible.

ZN-DPX21-S Differential Pressure Station ZN-DPX21-S

Precision measurement of temperature and humidity around production lines and equipment.

ZN-PD-S Air Particle Sensor ZN-PD-S

Dust fallout and airborne particles detract from product quality. Continuously monitor these two factors to minimize their effects.

ZN-THS-S / THX11-S Precision Thermo-Humidity Logger ZN-THS-S / THX11-S

Easy temperature and humidity control with an SD Card

ZX-GT Smart Sensor Wide Laser Beam Measurement Sensor (Line Imaging Device Type) ZX-GT

Achieves Micron Accuracy with Longest-in-Class Sensing Distance

3F88L-160 / 162 Cam Positioner 3F88L-160 / 162

Faster, More Advanced Rotational Control for Greater Precision and Improved Productivity

61F-G[]N Floatless Level Switch (Compact Type) 61F-G[]N

Improved Design for a More Lightweight Construction and Reduced Standby Power Consumption.

A General-purpose Basic Switch A

High-capacity Switch Capable of Handling 20 A Loads with Large Inrush Currents

A165E Emergency Stop Switch (16-dia.) A165E

Separate Construction with Minimal Depth

A165S / W Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.) A165S / W

Separate Construction with Cylindrical 16-dia. Body

A22NN / A22NL Pushbutton Switches A22NN / A22NL

22-mm dia. Pushbutton Switches. Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring.

A22TK Safety Key Selector Switch A22TK

Key-type Selector Switch with Direct Opening Mechanism

A30NS / A30NW Selector Switches A30NS / A30NW

30-mm dia. Knob-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring. Workability and safety improvements.

A3P Lighted Pushbutton Switches A3P

Large Rectangular-bodied Lighted Pushbutton Switches

A7CN / A7CN-L Thumbwheel Switch A7CN / A7CN-L

A Brand New Lineup of A7C Series Compact Thumbwheel Switches

BF-[](R) / BS-1(T) Electrode Holder BF-[](R) / BS-1(T)

Complete Lineup for Use in High-temperature, High-pressure Environments or Where Exposed to Chemicals

CJ1G-CPU4[]P CJ Series Loop CPU Unit CJ1G-CPU4[]P

Integrated Loop Control and Sequence Control

CJ1W-OC / OA / OD CJ-series Output Units CJ1W-OC / OA / OD

A Wide Range of Basic Output Units for High Speed Output and Different Applications. This unit is available for CJ/NJ controller.

CJ1W-PTS CJ-series Process Analog I/O Unit CJ1W-PTS

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V)

CPM1A-SRT21 I/O Link Unit CPM1A-SRT21

I/O Link Unit for CPM2A/CPM1A

CRT1-[]D08TA(-1) / []D16TA(-1) / []D08TAH(-1) / []D16TAH(-1) Digital I/O Slave Units with Screw Terminal Blocks (3-tier Terminal Block) CRT1-[]D08TA(-1) / []D16TA(-1) / []D08TAH(-1) / []D16TAH(-1)

With the relay terminal blocks, doubling up wires on terminals is not necessary! Smart Slave Units with Easy-to-understand Wiring Locations with One Common for Every Point.

CRT1B-[]D02S(-1) Bit Slave Units with e-CON Connectors CRT1B-[]D02S(-1)

Simple and Intelligent Bit Slaves with Industry-standard e-CON connectors.

CS1D CS1D Overview CS1D

Redundant CPU Units, Power Supply Units, Communications Units, and Expansion I/O Cables

CS1W-CRM21 CS-series CompoNet Master Units CS1W-CRM21

CS-series CompoNet Master Units Increase the Range of Applicability of Sensors and Actuators.

D40Z Compact non-contact Door Switch D40Z

Supports ISO 13849-1 (PLe/Safety Category 4). Can be used on higher risk level applications by connecting to Safety Controllers.

D4C Enclosed Switch D4C

Sealed, Compact, and Slim-bodied Switch Offers Choice of Many Actuators

D4E-[]N Small Sealed Switch D4E-[]N

Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E

D4F Small Safety Limit Switch D4F

Ultra-Small Safety Limit Switch

D4GS-N Slim Safety Door Switch D4GS-N

Slim Safety Door Switches with IP67 Rating

DeviceNet Peripheral Devices DeviceNet Peripheral Devices DeviceNet Peripheral Devices

T-branch Connector, Power Supply Tap, Cable, Connector, Terminal-block Terminator,

DRT2-[]D16TA(-1) Transistor Remote I/O Terminals with 3-tier Terminal Blocks DRT2-[]D16TA(-1)

A Smart Slave with a 3-tier Terminal Block That Means Wiring Locations Are Easy to Understand with No Sharing of Terminals.

E2CY-SD Non-ferrous-metal-detecting Proximity Sensor (Separate Amplifier Type) E2CY-SD

Achieve stable detection of non-ferrous metals such as aluminum, copper, and stainless steel.

E2E (Small-diameter) Small-diameter Proximity Sensor E2E (Small-diameter)

Ultra small size, but surprisingly easy installation!

E2K-X Cylindrical Proximity Sensor E2K-X

General-purpose Threaded Capacitive Sensor

E2S Super-compact Proximity Sensor E2S

Advanced Performance and Wide Range of Selections in a Supercompact Size

E39-L / -S / -R Mounting Brackets, Slits, Reflectors E39-L / -S / -R

Wide Variations of Mounting Brackets, Slits and Reflectors

E3C-LDA[]N Photoelectric Sensor with Separate Digital Amplifier (Laser-type) E3C-LDA[]N

Variable Laser Beam for Spot, Line, or Area Detection

E3JM Built-in Power Supply Photoelectric Sensor E3JM

Model Contribute to Overall Cost Reduction

E3NX-CA Color Fiber Amplifier Unit E3NX-CA

Smart Fiber Amplifier Units with White LEDs. High Color Discrimination Capability with the Same Easy Operation as Previous Fiber Amplifier Units. Existing General-purpose Fiber Units Can Be Connected.

E3X-DRT21-S VER.3 Fiber Amplifier Sensor Communication Unit E3X-DRT21-S VER.3

The DeviceNet Communication Unit That Simplifies Managing Sensor Settings

E3ZR-C Oil-resistant Photoelectric Sensors E3ZR-C

Photoelectric Sensors That Withstand Cutting Oil to Reduce Failures Caused by Ingress of Cutting Oil

E4E2 Compact Ultrasonic Sensor E4E2

Compact, Through-beam, Ultrasonic Sensor

E58-CIFQ1 USB-Serial Conversion Cable E58-CIFQ1

Cable for Support Software Enables Connection Even with Temperature Controllers Not Equipped with Communications

E5ED / E5ED-B Digital Temperature Controller (48 x 96 mm) E5ED / E5ED-B

Optimize Control by Detecting Status Changes. Easily Satisfy Both Productivity and Quality.

E5L Electronic Thermostat E5L

Ideal for Simple Built-in Control.

E6A2-C Incremental 25-mm-dia. Rotary Encoder E6A2-C

Compact Encoder with External Diameter of 25 mm

E6CP-A Low-cost Encoder with Diameter of 50 mm E6CP-A

General-purpose Absolute Encoder with External Diameter of 50 mm

E8FC IoT Flow Sensors E8FC

Detect signs of abnormalities in cooling water, water-soluble coolant, and water-insoluble oil by simultaneous measurement of “flow rate + temperature”

EE-SPW321 / 421 Photomicrosensor with Amplifier and Cable EE-SPW321 / 421

Compact, Thin-profile Photomicrosensor with special amplifier.

EE-SPX303N / SPX403N Broad Slot-type Photomicrosensor EE-SPX303N / SPX403N

A Wide Slot Width of 13 mm and Superior Resistance to Light Interference and Noise.

EE-SPY801 / 802 Wafer-carrier Mounting Photomicrosensors EE-SPY801 / 802

Photomicrosensors for detecting wafer-carrier mounting.

ES1-N Infrared Thermosensor ES1-N

Measure Workpieces without Physical Contact Non-damaging, Sanitary, and Efficient Temperature Management

ESTT ThermoTools Support Software (Ver. 1.0) ESTT

The only parameter-setting software you need to support many models.

F3SG-RA-01TS / 02TS Safety Light Curtain F3SG-RA-01TS / 02TS

Offers Both Durability and Reliability

F3W-D Picking Sensor F3W-D

Compact, Resistant to Mutual Interference, and Ideal for Picking a Variety of Parts

FJ Series (Camera and Software Vision Package) PC Vision System FJ Series (Camera and Software Vision Package)

Built-in high-quality image processing in a PC system. Camera and Software Vision Package.

FL Series Lighting for Image Processing FL Series

Next generation ODR technology

For STC/FS Series (Accessory Fixed Focus Lens) Accessory Fixed Focus Lens For STC/FS Series (Accessory Fixed Focus Lens)

Small-diameter fixed focus lens for small board cameras and remote head camera

G3J-T Soft-start/stop Solid State Contactors G3J-T

Soft-start/stop Function Starts and Stops Three-phase Motors Smoothly and Economically

G3PH High-power Solid State Relays G3PH

High-power, Load-control SSRs with High Current of 75 or 150 A and High Voltage of 240 or 480 VAC

G3RV-SR Slim I/O Solid State Relay G3RV-SR

Our Value Design Products Increase the Value of Your Control Panels. Global standard size, low profile type slim I/O solid state relay with width 6.2 mm.

G3ZA Multi-channel Power Controller G3ZA

Optimum Cycle Control for High-precision Control with Low Noise

G7J Power Relay G7J

A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor

G7S-[]-E Relays with Forcibly Guided Contacts G7S-[]-E

Relays with Forcibly Guided Contacts and High Switching Capacity of 10 A

G7TC I/O Relay Terminal G7TC

Single Cable Connection to PLC Means Space is Saved and Less Control Panel Wiring is Required.

G9B Stepping Relay Unit G9B

Ideal for Controlling Pumps and Production Lines with Six or Twelve Stepping Circuits

G9SE Safety Relay Unit G9SE

Complete line-up of compact units, including OFF-delayed safety output models

G9SX-GS Safety Guard Switching Unit G9SX-GS

A Safety Measure for Hazardous Operations That Does Not Lower Productivity

GLS Magnetic Proximity Sensor GLS

Easy-to-use, Simple Magnetic Proximity Sensor

GRT1 Series SmartSlice CompoNet Communications Unit GRT1 Series

The CompoNet-compliant unit can interface up to 256 inputs and 256 outputs at one node.

GT1-ID / OD Digital I/O Units GT1-ID / OD

Digital I/O Units Compatible with MULTIPLE I/O TERMINAL

GX-[]D16[]1 / OC1601 Digital I/O Terminal 2-tier Terminal Block Type GX-[]D16[]1 / OC1601

High-speed digital I/O terminal with the screw type terminal block for EtherCAT communications.

H3DT-A Power ON-delay Timer H3DT-A

Our Value Design Products Increase the Value of Your Control Panels. Single Mode Timers with power ON delay operation.

H5CZ Digital Timer H5CZ

Easy to Use and Easy to Read.

H5F Digital Daily Time Switch H5F

Daily Time Control with Simple Operations

H7CC-R Digital Tachometer H7CC-R

New and improved design for easier use, setting and maintenance. The improved user interface is intuitive and offers better overall visibility. Replacement time notification function notifies the user of potential preventive maintenance

H7HP Total Counter/Time Counter (DIN 72 x 36) H7HP

DIN 72 x 36-mm Total Counter/Time Counter with Easy-to-read Displays and Water and Oil Resistance Equivalent to IP66

i4H SCARA Robots i4H

New i4H robot for precision machining, assembly, and material handling

ACE software is available to download from the Omron US website.

iX4 Parallel Robots EtherCAT (NJ501-R) version iX4

Four-axis parallel robot achieves high speed and high precision

ACE software is available to download from the Omron US website.

J7MC Series Manual Motor Starter (Motor Protection Circuit Breaker) J7MC Series

MPCB system, protection from Overload, Phase failure and Short Circuit

K3HB-P Timer Interval Indicator K3HB-P

Digital Time Interval Meter for Measuring Passing Speed, Time, or Cycle between Two Points.

K3MA-J Process Meter K3MA-J

Highly Visible LCD Display with 2-color (Red and Green) LEDs

K3MA-L Temperature Meter K3MA-L

Highly Visible LCD Display with 2-color (Red and Green) LEDs

K6CM Motor Condition Monitoring Device K6CM

Quantifying the status of a three-phase induction motor.

K7L-U[] / UD[][] Liquid Leakage Sensor Amplifiers for Long-distance Wiring K7L-U[] / UD[][]

Ultra-miniature Liquid Leakage Sensor Amplifier Enables Longest Liquid Leakage Monitoring Distance in Industry. K7L-UB and K7L-UDB are our Value Design products which increase the value of your control panels.

K8DT-AW Single-phase Overcurrent/Undercurrent Relay K8DT-AW

Our Value Design Products Increase the Value of Your Control Panels. Detect errors in motors and other equipment through current changes. Monitor for overcurrents and undercurrents simultaneously with one Relay.

LVS-9585 Series Code Verification System LVS-9585 Series

Portable Barcode Verification System

MicroHAWK F430-F / F420-F / F330-F / F320-F Smart Camera MicroHAWK F430-F / F420-F / F330-F / F320-F

World’s smallest fully-integrated vision system.

MY-GS Miniature Power Relays MY-GS

Mechanical Indicators Added as a Standard Feature to Our Best-selling MY General-purpose Relays

NA-RTSM / RTLD[][] Soft-NA NA-RTSM / RTLD[][]

NA functions work on Windows

NX701-Z[][][] NX-series NX701 Artificial Intelligence CPU Units NX701-Z[][][]

Ultimate AI edge controller born from the fusion of AI and control

NX-ECC NX-series EtherCAT Coupler Unit NX-ECC

Flexible System Can Be Achieved with Highspeed, High-precision Remote I/O for EtherCAT

NX-TC NX-series Temperature Control Unit NX-TC

Optimize Control by Detecting Status Changes Easily Satisfy Both Productivity and Quality

P2RFZ / P2RF, P2R, P7TF, PYFZ / PYF, PTFZ / PTF, PYD, PT, P7LF, PF, P2CF, PFA, P3G / P3GA, PL Common Sockets P2RFZ / P2RF, P2R, P7TF, PYFZ / PYF, PTFZ / PTF, PYD, PT, P7LF, PF, P2CF, PFA, P3G / P3GA, PL

A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models

R88M-1[] / R88D-1SN[]-ECT AC Servo System 1S-series R88M-1[] / R88D-1SN[]-ECT

Optimized installation and setup Increased machine productivity

R89F-D DC Axial Fans R89F-D

Reducing required design work through unified power supply voltage

S8VK-WB Switch Mode Power Supply (240/480/960-W Models) S8VK-WB

Even more compact three-phase 380 to 480 V input power supplies. Reduces wiring work with the Push-In Plus terminals. With a line-up that includes 24 VDC and 48 VDC models.

S8V-NF Noise Filter (Single-phase 250 V 3 A / 6 A Type) S8V-NF

DIN Rail Mounting Type Ideal for Control Panels Featuring a Slim Design that Saves Space Push-In Connections for Safe and Easy Wiring

STC Series (GigE Vision Small CMOS Board Camera) GigE Vision Small CMOS Board Camera STC Series (GigE Vision Small CMOS Board Camera)

GigE Vision board camera with high-resolution, high-speed CMOS sensor

SYSMAC-XR[][][] Sysmac Library SYSMAC-XR[][][]

The Sysmac Library for the NJ/NX/NY Controller provides Function Blocks packed with know-how that makes advanced control easy.

T20 Pendant Pendant T20 Pendant

Excellent operability and ergonomic design

ACE software is available to download from the Omron US website.

TM Series Collaborative Robots TM Series

Collaborative robot for assembly, packaging, inspection and logistics

V440-F 5-Megapixel C-Mount Code Reader V440-F

User-configurable barcode reader

XS5[]R Oil-resistant Connectors XS5[]R

Smartclick Oil-resistant Connectors with Improved Oil Resistance

XW2K-COM Ultra-Compact Common Terminal Blocks (For Sensor Power Supply) XW2K-COM

This model is small and ideal for sensor power supply

Y92[] Accessories Y92[]

Mounting Brackets, Mounting Sleeves and Protective Covers

ZJ-FA20 Ionizer (Basic Fan Type) ZJ-FA20

High-speed, High cost performance Ionization

ZN-J Ionizers for Air Clean Unit ZN-J

Ionizer That Can be Combined with Air Clean Units (Industry First/Patent pending)

ZN-PD Air Particle Sensor ZN-PD

Air Particle Sensor for In-line Measurement (Smallest in the Industry)

ZN-THX21-S Thermo-Humidity Station ZN-THX21-S

Precision measurement of temperature and humidity around production lines and equipment.

ZUV-C20H / 30H Smart Curing System (Standard model/Multi-function model) ZUV-C20H / 30H

Achieves a low initial cost level believed to be impossible in an LED system up to now.

ZW-8000 / 7000 / 5000 Series Confocal Fiber Displacement Sensor ZW-8000 / 7000 / 5000 Series

Reliable measurements for any material and surface types

ZX2 Smart Sensors Laser Displacement Sensors CMOS Type ZX2

Stable measurement that is unaffected by workpiece changes. The simple setting for everyone.

3G8F7-CRM21 CompoNet Master Board for PCI Bus/CompactPCI Bus 3G8F7-CRM21

CompoNet Master Board for PC which provides ultra-high speed control

3Z4S-LE VS-LLD Series Ultra-high-resolution Lens for C-mount Cameras 3Z4S-LE VS-LLD Series

Ultra-high-resolution lens for 4/3-inch cameras

61F-G[] Floatless Level Switch (Basic Type) 61F-G[]

Basic Building-block Controllers That Mount Directly to Panels for Easier Maintenance

A22NS / A22NW Selector Switches A22NS / A22NW

22-mm dia. Knob-type Selector Switches. Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring.

A30NK Key-type Selector Switches A30NK

30-mm dia. Key-type Selector Switches Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring. Workability and safety improvements.

A4EG Enabling Grip Switch A4EG

Enabling grip switches are safety components used to prevent unexpected machine operation when workers perform maintenance or other non-routine tasks inside hazardous areas, such as areas inside protective shields.

A7BS / A7BL Thumbwheel Switch A7BS / A7BL

Wide Range of Locking-type Models Available

CJ1W-AD / DA / MAD CJ-Series Analog I/O Unit CJ1W-AD / DA / MAD

Consistent Microsecond Throughput: Models with Direct Conversion Join the Lineup. This unit is available for CJ/NJ controller.

CJ1W-MD CJ-series Mixed I/O Units CJ1W-MD

A Wide Range of Basic Mixed I/O Units for Different Applications and Wiring Methods. This unit is available for CJ/NJ controller.

CJ2H-CPU6[] CJ-series CJ2H CPU Units CJ2H-CPU6[]

Small, Fast, Flexible: Inheriting and improving CJ1 features, the CJ2 CPU Units is the best choice for the machine control with high-speed and high-capacity.

CPM2C Compact PLC series CPM2C

A versatile controller for up to 192 I/O points in an ultra-compact package

CRT1-[]D16S(-1) / []D32S(-1) / []D16SH(-1) / []D32SH(-1) Digital I/O Slave Units with e-CON Connectors CRT1-[]D16S(-1) / []D32S(-1) / []D16SH(-1) / []D32SH(-1)

Industry-standard Sensor Connectors for Easy Connection to Pre-wired Sensors without Special Tools.

CS1W-AT2[][] C200H I/O Terminal Block Conversion Adapter CS1W-AT2[][]

Easy and secure replacement by reusing the I/O terminal block wiring

CS1W-PDC / PTW / PTR SYSMAC CS-series Process Analog I/O Units CS1W-PDC / PTW / PTR

Provides the functionality of isolators, power supplies, signal converters, and other devices.

CXONE-AL[][]D-V4 FA Integrated Tool Package CXONE-AL[][]D-V4

The CX-One is a comprehensive software package that integrates PLC Programming Software with Support Software for setting up Networks, Programmable Terminals, Servo Systems, Inverters, and Temperature Controllers.

D40A / G9SX-NS Compact Non-Contact Door Switch/Non-Contact Door Switch Controller D40A / G9SX-NS

Electronic Detection Mechanism for Better Stability in Non-contact Door Switch Operation

D4B-[]N Safety Limit Switch D4B-[]N

Robust safety limit switch with metal housing Slow-action and snap-action contact with certified direct opening operation certification.

D4CC Miniature Limit Switch D4CC

Many Models Including Roller Lever Switches are Only 16-mm Thick with Connector

D4NH Safety-door Hinge Switch D4NH

Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment

D4NL Guard Lock Safety-door Switch D4NL

Best-selling Guard Lock Safety-door Switch Available in Several Compact, Multi-contact Models

DCA2 / DCN3 / XS4 DeviceNet Connectors with Thick Cables DCA2 / DCN3 / XS4

Enviroment-resistive Models for Thick Cables

DRT2-ROS16 Remote I/O Terminal with Relay Outputs DRT2-ROS16

A Smart Slave with Relay Outputs and One-step Relay Replacement for Remote Maintenance.

E2E DC 2-Wire (PUR Cable/Self-diagnosis Output), AC 2-Wire and AC/DC 2-Wire E2E

Models with DC 2-Wire (Self-diagnosis Output) and AC 2-Wire added to the lineup

E2E-series DC 2-Wire and 3-Wire Models (2E-X[]D[], E2E-X[]E[], E2E-X[]F[]) have been integrated into the E2E NEXT Series. Refer to the catalog (Cat. No. D120) for details.

E2EC-M / -Q Stainless Steel Sensing Surface Amplifier Proximity Sensor E2EC-M / -Q

Improved Durability with Stainless Steel Sensing Head

E2K-F Flat Proximity Sensor E2K-F

Flat Capacitive Sensor with a Thickness of Only 10 mm

E39-VA Hand-held Checker E39-VA

Handheld Power Supply to Check Sensor Operation

E3NX-FA Smart Fiber Amplifier Units E3NX-FA

The Advanced Fiber Amplifier Units That Handles On-site Needs

E3Z-[]-IL[] IO-Link Photoelectric Sensor E3Z-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! Standard Photoelectric Sensor.

E52 (For Packing Machine) Temperature Sensors for Packaging Machines E52 (For Packing Machine)

Accurately Measure Seal Temperature. Temperature Sensors for Packaging Machines.

E5DC / E5DC-B Digital Temperature Controller (22.5 mm Wide, and DIN Track-mounting Type) E5DC / E5DC-B

The E5DC Mounts to DIN Track and Is Ideal for Connections to HMIs and PLCs. It provides the Same Easy Operation and Advanced Performance as the Rest of the E5[]C Series. Models with Push-In Plus Terminal Blocks Added to Lineup.

E6B2-C Incremental 40-mm-dia. Rotary Encoder E6B2-C

General-purpose Encoder with External Diameter of 40 mm

E8PC IoT Pressure Sensors E8PC

Detect signs of abnormalities in hydraulic oil and sealant by simultaneous measurement of “pressure + temperature”

EE-SA701 / 801 Pushbutton-type Photomicrosensor EE-SA701 / 801

Using a pushbutton enables accurately detecting difficult-to-detect objects.

EE-SX77 / SX87 Photomicrosensor with Slim Cable (Non-modulated) EE-SX77 / SX87

Slim, Compact Photomicrosensor that is still easy to use. Conforms to ISO13849-1 (PLc, cat1), September 2023.

F03-[] Electrodes and Accessories F03-[]

A Wide Variety of Electrodes for Long Lasting Reliability

F440-F 5-Megapixel C-Mount Smart Camera F440-F

User-configurable smart camera.

FHV7 Series Smart Camera FHV7 Series

Ultimate flexibility to fit ever-changing production scene

G2RV-SR Slim I/O Relay G2RV-SR

Our Value Design Products Increase the Value of Your Control Panels. Global standard size, low profile slim I/O relay with width 6.2 mm.

G3J-S Soft-start Solid State Contactors G3J-S

Soft-start Function Starts Motors Smoothly and Economically

G3PF Solid State Relays with Built-in Current Transformer G3PF

A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection.

G70A I/O Terminal Socket G70A

16-point I/O Terminal Socket accepts Various Devices such as G2R Relays, Solid State Relays, and Timers for More System Flexibility.

G7Z Power Relays G7Z

Multi-pole Power Relay for Contactor Current Range Capable of Carrying and Switching 40 A at 440 VAC

G9SB Safety Relay Unit G9SB

Ultra Slim Safety Relay Unit

G9SX-SM Standstill Monitoring Unit G9SX-SM

Sensor-less Monitoring of Standstill for Machines with Long Inertia

GT1-AD / DA Analog I/O Units GT1-AD / DA

Analog Input/Output Units Compatible with MULTIPLE I/O TERMINAL

GX-ID16[]2 / OD16[]2 / MD16[]2 Digital I/O Terminal 3-tier Terminal Block Type GX-ID16[]2 / OD16[]2 / MD16[]2

A common terminal is provided for each contact. It eliminate the needs for relay terminal blocks.

H3DT-F Twin Timer H3DT-F

Our Value Design Products Increase the Value of Your Control Panels. Switch between flicker-OFF or flicker-ON start mode.

H5CX Digital Timer H5CX

DIN 48 × 48-mm Multifunction Digital Timer/2-stage Digital Timer

H5L Daily Time Switch H5L

Weekly Control with a Large Time Display

H7E[]-N Self-powered Totalizer H7E[]-N

Compact Economical Totalizer with High Visibility Available with Backlit LCD Display

Hornet Parallel Robots Hornet

Parallel robot ideal for use in the food and beverage, pharmaceutical, and healthcare industries

ACE software is available to download from the Omron US website.

J7TC Series Thermal overload relay J7TC Series

Motor Protection from Overload and Phase -loss by Combination with J7KC for up to 2.2 kW (240 VAC) *, 5.5 kW (440 VAC) * Based on JIS C 8201-4-1

K3HB-C Up/Down Counting Pulse Indicator K3HB-C

Measure High-speed Up/down Pulses with this Up/down Pulse Meter.

K7L-AT50[] / AT50D[][] Liquid Leakage Sensor Amplifier/Liquid Leakage Sensor Amplifier with Disconnection Detection Function K7L-AT50[] / AT50D[][]

Reliable Detection of a Wide Variety of Liquids Ranging from Water to Liquid Chemicals with Low Conductivity. Four Sensing Ranges Available. K7L-AT50B and K7L-AT50DB are our Value Design products which increase the value of your control panels.

K7TM Heater Condition Monitoring Device K7TM

Predictive maintenance by monitoring heater condition

K8DT-VS Single-phase Voltage Relay K8DT-VS

Our Value Design Products Increase the Value of Your Control Panels. Detect abnormal voltages applies to equipment to protect against equipment failure. Use in either overvoltage or undervoltage mode.

KM-N2-FLK Power Monitor KM-N2-FLK

Global Power Monitor for Mounting Inside Control Panels

LVS-9580 Series Code Verification System LVS-9580 Series

Portable Barcode Verification System

NE0A-SCPU01 Safety Network Controller NE0A-SCPU01

New Lineup for Safety Applications with Up to 12 Inputs

NX502-[][][][] Machine Automation Controller NX502-[][][][]

Up to ten EtherNet/IP networks, ideal for large-scale systems

NX701-1[]20 NX-Series NX701 Database Connection CPU Units NX701-1[]20

The Controller can be directly connected to a database. No special Unit, software, nor middleware is required.

NX-ID / IA / OD / OC / MD NX-series Digital I/O Unit NX-ID / IA / OD / OC / MD

A wide range of digital I/O units from general purpose use to high-speed synchronous control

NX-SL5[][][] Safety CPU Unit NX-SL5[][][]

Integrate safety into ultra-flexible, ultra-high-speed machine automation and build a distributed safety system

R87F / R87T AC Axial Fans R87F / R87T

Optimum Cooling with a Comprehensive Lineup of Axial Fans

R88M-K, R88D-KN[]-ECT G5 Series AC Servomotor/Servo Drives with built-in EtherCAT Communications R88M-K, R88D-KN[]-ECT

The G5 series has a direct connection to the NJ controller via EtherCAT. Customers can design faster, more advanced machine automation control systems.

S8VK-R Redundancy Unit S8VK-R

Contribute to build high reliable systems Compact and Cost-effective solution for Back-up applications Easy setup for system reliability requirement

S8VK-X Switch Mode Power Supply (60/120/240/480-W Models) S8VK-X

EtherNet/IP, Modbus TCP-Compatible Maximizing System Availability Through the Connecting of Equipment to IoT

SHL Enclosed Switch SHL

Subminiature Enclosed Switch (Measuring 48 x 17.5 x 45 mm) with High Sealing Property

STC Series (USB3.0 Remote Head Camera) USB3.0 Remote Head Camera STC Series (USB3.0 Remote Head Camera)

Ultra-compact USB3 Vision remote head camera

TL-LP / LY Long-distance Proximity Sensor TL-LP / LY

Long-distance Model with a Sensing distance of 50 mm.

TL-W Flat Inductive Proximity Sensor TL-W

Standard Flat Sensors in Many Different Variations

VAQ Pushbutton Switch (Cylindrical 10.5-dia.) VAQ

Built-in V-series Miniature Basic Switch for Compatibility with Business and Consumer Equipment

X General-purpose Basic Switch X

Direct Current Switch with Built-in Magnetic Blowout

XS2 Round Water-resistant Connectors (M12 Threads) XS2

Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort

XS5, XS6 Industrial Ethernet Cables XS5, XS6

Cables and Connectors for EtherNet/IP™, EtherCAT® and Other Industrial Ethernet Networks

ZN-CTX / CTM Portable Power Monitor ZN-CTX / CTM

Whenever needed, you can identify the level of electricity consumption immediately at your worksite.

ZS-CRT Sensor Communications Unit ZS-CRT

A Communications Gateway that Connects Smart Sensors to CompoNet

ZW-SQ Series Confocal Fiber Displacement Sensor Sensor Head ZW-SQ Series

Ultra-compact and Ultra-lightweight. Stable Measurements for Any Material

ZX1 Smart Sensor Laser Sensor with Built-in Amplifier ZX1

A CMOS Laser Sensor That's Optimum for Simple Measurements

61F-LS Floatless Level Switch (Compact, Plug-in Type) 61F-LS

Consolidates the Specifications through Free Power Supply, thus Allowing Use in High Temperature Environments with Temperatures of Up to 70°C* * Excluding the DC power supply type.

A165K Key-type Selector Switch (Detachable) (Cylindrical 16-dia.) A165K

Separate Construction with Cylindrical 16-dia. Body

A2A Subminiature Pushbutton Switch (Cylindrical 10.5-dia.) A2A

High-performance Pushbutton Switch with Built-in Subminiature Basic Switch

A4E Enabling Switch A4E

3-position Enabling Switch for Safer Robot Operation

A7PS / A7PH Thumbwheel Switch A7PS / A7PH

Dust-tight, Easy-to-Use, Push-operated Switches with Large Display Characters

CJ1W-INT01 CJ-series Interrupt Input Units CJ1W-INT01

High-speed Starting of I/O Interrupt Tasks. Use Up to Two Units for a Total of Up to 32 Interrupt Inputs. This unit is available for CJ/NJ controller.

CJ1W-PDC15 CJ-series Process Analog I/O Unit CJ1W-PDC15

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V). This unit is available for CJ/NJ controller.

CK3W-AX[][][][][] Axial Interface Unit CK3W-AX[][][][][]

Various encoder interfaces and high-speed multi-axis control by analog commands for precise machine operation

CP1E CP-series CP1E CPU Units CP1E

Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control

CP1L CP series CP1L CPU Unit CP1L

High Performing Programmable Controller with Embedded Ethernet

CRT1-AD04 / DA02 Analog I/O Slave Units CRT1-AD04 / DA02

Convert to Smart for Smarter Processing! Simple and Intelligent Analog I/O Slaves

D4BS Safety-door Switch D4BS

The Special Operation Key Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment

D4N-[]R Pull-reset Safety Limit Switch D4N-[]R

A Series of Pull-reset Models Now Available

D4V Small Limit Switch D4V

Compact Vertical Models Sized for Asian Standards

D5V Contact Displacement Sensor D5V

Contact Displacement Sensor with Built-in Amplifier That Enables In-line Measurement of a Wide Range of Objects with a Low Operating Force

DST1 Series Safety I/O Terminals DST1 Series

Distributed Safety Terminals That Reduce Wiring.

DZ Special-purpose Basic Switch DZ

DPDT Basic Switch for Two Independent Circuit Control

E2A Cylindrical Proximity Sensor E2A

Safe Mounting with Greater Sensing Distance

E2EC Cable Amplifier Proximity Sensor E2EC

Subminiature Sensors with Long-distance Detection

E2K-L Liquid Level Sensor E2K-L

Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid

E32-T11NF[] Oil-resistant Fiber Units E32-T11NF[]

Fiber Units for Reliable, Stable Operation in Cutting Oil Environments

E3C Compact Head Amplifier-separated Photoelectric Sensor E3C

Thin, Compact Head Saves Space and Mounts Closely. Built-in Interference Protection Provided.

E3NX-MA Smart Fiber Amplifier Units E3NX-MA

2-channel Amplifier reduces installation space by half. Downsized Equipment and Control Panels

E3S-DC Color Mark Photoelectric Sensor E3S-DC

Color Mark Detection on Any Type of Packaging. Narrow Beam and Large Lens for Stable Detection of Workpieces Tilted at Various Angles.

E5GC Digital Temperature Controller (48 × 24 mm) E5GC

Easy Operation and High Performance of the E5[]C Series in a Compact 48 x 24-mm Body

E6C2-C Slim Incremental 50-mm-dia. Rotary Encoder E6C2-C

General-purpose Encoder with External Diameter of 50 mm

E8F2 Digital Pressure Sensor E8F2

Pressure Sensor with Easy-to-Read LED Display

eCobra SCARA Robots eCobra

Mid-size and large-size SCARA robot for precision machining, assembly, and material handling

ACE software is available to download from the Omron US website.

EE-SX47 / SX67 Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated)*1 EE-SX47 / SX67

Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity.

F03-05, PH-1 / -2 Electrode Bands / Underwater Electrode F03-05, PH-1 / -2

Easy Mounting and Removal. Ideal for Applications in Deep Wells.

F03-16PE / 16PT / 15 / 16PS Sensing Band/Liquid Leakage Point Sensor F03-16PE / 16PT / 15 / 16PS

A New Liquid Leakage Point Sensor Has Been Added to the K7L Series. Fluoroplastic Coating on the Bottom Electrode Ensures Chemical Resistance.

F3SP-B1P Control Unit F3SP-B1P

Less Wiring Required with Safety Light Curtain

F3W-MA Smart Muting Actuator F3W-MA

Integrated muting sensor based on multi-beam photoelectric sensor

G3F / G3FD Solid State Relays G3[]-VD G3F / G3FD

Solid State Relays Featuring the Same Profile as MY Power Relays

G3J Simple Solid State Contactors G3J

Solid State Contactors That Can Drive 3-phase Motors Frequently

G3PE (Single-phase) Solid State Relays for Heaters G3PE (Single-phase)

Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications.

G6B-4[][]ND Terminal Relay G6B-4[][]ND

Compact Terminal Relay with 4 Independent Outputs

G70D-SOC08 Relay Terminal G70D-SOC08

Space-saving and Labor-saving 8-point Output Block

GT1-TS04[] Temperature Input Units GT1-TS04[]

Temperature Input Units for use with MULTIPLE I/O TERMINAL

GX-[]D16[]8 / []D32[]8 Digital I/O Terminal e-CON Connector Type GX-[]D16[]8 / []D32[]8

Easy wiring using industry standard e-CON connectors. Special wiring tool is not necessary.

GX-ILM08C GX-series IO-Link Master Unit GX-ILM08C

IO-Link makes sensor level information visible and solves the three major issues at manufacturing sites! The unit for M12 Smartclick connector can be used in watery, and dusty environments.

H3CA Solid-state Timer H3CA

DIN-sized (48 × 48, 45 × 75 mm) Timer with Digital Setting and LCD Display

H3DT-G Star-delta Timer H3DT-G

Our Value Design Products Increase the Value of Your Control Panels. Set two time ranges between 1 and 120 s with one Timer.

J7KC Series Magnetic Contactor J7KC Series

Best Match for upto 2.2 kW (240 VAC) *, 5.5 kW (440 VAC) Motor and Primary Side switches * Based on JIS C 8201-4-1

J7KCA Series Auxiliary Relay (Contactor Relay) J7KCA Series

Same shape as J7KC magnetic contactors Ideal for standardizing panel design

K3MA-F Frequency/Rate Meter K3MA-F

Highly Visible LCD Display with 2-color (Red and Green) LEDs

K7GE-MG Insulation Resistance Monitoring Device K7GE-MG

Reliable, Safe and Accurate Automatic Insulation Resistance Measurements

K8DT-VW Single-phase Overvoltage/Undervoltage Relay K8DT-VW

Our Value Design Products Increase the Value of Your Control Panels. Detect abnormal voltages applies to equipment to protect against equipment failure. Monitor for overvoltages and undervoltages simultaneously with one Relay.

KM-N3-FLK Power Monitor KM-N3-FLK

Global Power Monitor for On-panel Installation

M22N Indicators M22N

22-mm dia. Indicators. Control panel miniaturization through a more compact design and modified wiring direction. Addition of Push-In Plus terminal blocks for easy wiring.

M2P Indicators M2P

Large Rectangular-bodied Indicators

MY Miniature Power Relays MY

Best-selling, general-purpose relays that can be selected based on operating environment and application

NB Series Programmable Terminals NB Series

Quality color display with LED backlighting. Complete HMI family. Comprehensive features.

NX102-[][][][] NX-Series NX1 CPU Units NX102-[][][][]

Powerful functionality in a compact design

NX-SL3[][][] Safety CPU Unit NX-SL3[][][]

The simplest way to integrate safety into ultra-high-speed machine automation - Bring safety to your production site

PYF[][]S / P2RF-[][]-S Screwless Clamp Terminal Sockets PYF[][]S / P2RF-[][]-S

New Screwless Terminal Sockets Added for MY and G2R Relays.

Quattro Parallel Robots Quattro

Four-axis parallel robot achieves high speed and high precision

ACE software is available to download from the Omron US website.

R87B Box Fan R87B

Comprehensive Lineup of Single, Double, and Triple Axial Fans with Easy One-step Mounting

S8VK-S S8VK-S (30/60/120/240/480-W Models) S8VK-S

A Perfect Fit for Small Control Panels Coated PCBs for Better Resistance to Environment Connections for Easy Wiring

TL-N / -Q Rectangular Standard Proximity Sensor TL-N / -Q

A Wealth of Models for All Types of Applications

V400-R2 Multi Code Reader V400-R2

The Ultra-small Multi-code Reader That Can Handle Speed

V460-H Industrial Handheld DPM Reader V460-H

Industrial Handheld DPM Reader with Ethernet Connectivity

VT-S530 PCB Inspection System VT-S530

Omron's 3D-SJI (Solder Joint Inspection) Ensuring High-quality Products in an Efficient Manufacturing Environment

WS02-SGWC1 / CPLC1 FA Communications Software WS02-SGWC1 / CPLC1

FA Communications Software Lets You Create Applications with Flexible, High-speed, and Direct Data Link Access to PLCs from Personal Computers.

XS5 Round Water-resistant Connectors (M12 Smartclick) XS5

Round Water-resistive Smartclick Connectors That Reduce Installation Work

ZC-[]55 Enclosed Switch ZC-[]55

Small, High-precision Enclosed Switch

ZJ-BAS Ionizer (Digital Bar Type) ZJ-BAS

The highest level of ionization in its class.

ZS Series Smart Sensor 2D Measurement Type ZS Series

A Lineup for Ultra-high-precision Displacement Measurements That Take Smart Sensors into a New Realm

ZX-L-N Smart Sensors (Laser Displacement & Measurement Sensors) ZX-L-N

A Host of Smart Functions Inside a Compact Body with a Full Range of Laser Types

3Z4S-LE VS-L / M42-10 Series Lens for M42-mount Cameras 3Z4S-LE VS-L / M42-10 Series

Wide variety of lenses with focal lengths ranging from 18 to 100 mm.

61F-03B / -04B Surge Killer Unit 61F-03B / -04B

Protect 61F Controllers Against Lightning.

A22 Pushbutton Switch (Cylindrical 22/25-dia.) A22

Install in 22-dia. or 25-dia. Panel Cutout (When Using a Ring)

CJ1W-IDP01 CJ-series Quick-response Input Units CJ1W-IDP01

Capture Input Signals Shorter Than the Cycle Time. This unit is available for CJ/NJ controller.

CJ1W-TC CJ Series Temperature Control Unit CJ1W-TC

A Single Unit Performing All the Functions of 4 Temperature Controllers. This unit is available for CJ/NJ controller.

CK3W-PD048 Power Supply Unit CK3W-PD048

Supplies power to the CK3M Controller

CRT1-TS04T / TS04P Temperature Input Units CRT1-TS04T / TS04P

High-speed Transfer of Temperature Data with CompoNet. Enhanced Smart Functions.

CRT1-VID16ML(-1) / VOD16ML(-1) Digital I/O Slave Units with MIL Connector (Vertical type) CRT1-VID16ML(-1) / VOD16ML(-1)

Thinnest in the industry! Ultimately little space and wiring are required.

CS1W-ETN21 SYSMAC CS-series Ethernet Unit CS1W-ETN21

Organically Connect the Production Site and Management

D4BL Guard Lock Safety-door Switch D4BL

Die-cast aluminum body Key holding force of 700 N

D4MC Enclosed Switch D4MC

Economical, High Utility Enclosed Switch

D5SN Contact Displacement Sensor D5SN

Five Types of Sensor for Use in a Wide Range of Environments

DRT2-[]D16S(-1) e-CON Connector Terminals DRT2-[]D16S(-1)

Includes Sensor Connector That Conforms to Industry Standards And Can Be Used to Connect Sensors with Pre-wired Cables without Using Special Tools.

E2B Cylindrical Proximity Sensor E2B

Perfect fit for standard environments

E2KQ-X Chemical-resistant Proximity Sensor E2KQ-X

Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster

E32 Series Fiber Sensors E32 Series

OMRON's Fiber Sensors continue to support an increasing range of applications.

E3C-VS / VM Small Spot/Mark (Separate Amplifier) E3C-VS / VM

Extremely thin beam ideal for detection of minute objects and marks

E3S-DB Transparent Object Detection Photoelectric Sensor E3S-DB

Superb Detection of Many Types of Transparent Objects

E3X-HD Smart Fiber Sensor E3X-HD

Surprisingly Stable Detection with Your Finger tip. Exceptionally easy operation and stabilizing technology reduce maintenance cost.

E52 with Ferrule (Low-cost Models) Temperature Sensor with Ferrule (Low-cost Models) E52 with Ferrule (Low-cost Models)

Low-cost platinum resistance thermometers, Low-cost thermocouples

E5CC, E5CC-B, E5CC-U Digital Temperature Controller (48 x 48 mm) E5CC, E5CC-B, E5CC-U

48 x 48 mm. Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications. E5CC-B is our Value Design product which increase the value of your control panel.

EE-SX97 Slot-type Photomicrosensor EE-SX97

Built-in connector enables downsizing and easier connection. Protective circuit for safe operation.

EST2-2C-MV4 CX-Thermo Support Software Ver. 4.[] EST2-2C-MV4

Monitoring/Setting Support Software for General-purpose temperature adjustment controller. Temperature Controllers Enabling Faster Parameter Setup, Device Adjustment, and Maintenance.

F03-16SF / 16SFC Liquid Leakage Sensing Band F03-16SF / 16SFC

Greater flexibility and superior workability compared with the F03-16PE.

F3SJ Series Safety Light Curtain F3SJ Series

Three versions available to meet your exact safety needs. All versions conform to the latest PLe/Safety Category 4 and SIL3 requirements.

FQ-M Series Vision Sensor FQ-M Series

Designed for motion tracking

G3H / G3HD Solid State Relays G3[]-VD G3H / G3HD

Solid State Relays Featuring the Same Profile as LY1 and LY2 Bi-power Relays

G3PE (Three-phase) Solid State Contactors for Heaters G3PE (Three-phase)

Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.

G70D-VSOC16 / VFOM16 Relay Terminal (Vertical Type) G70D-VSOC16 / VFOM16

Easy-to-use, Space-saving 16-point Output Block

GX-AD0471 / DA0271 Analog I/O Terminal 2-tier Terminal Block Type GX-AD0471 / DA0271

Analog I/O terminal with screw terminal block for EtherCAT communicaitons.

H3DT-H Power OFF-delay Timer H3DT-H

Our Value Design Products Increase the Value of Your Control Panels. Set two time ranges with each Timer, from 0.1 to 12 seconds for the S Series and from 1.0 to 120 seconds for the L Series.

H5CN Digital Timer H5CN

Miniature DIN-sized (48 x 48 mm) Quartz Timer with Abundant Series Versions

HL-5000 General-purpose Limit Switch HL-5000

Economical, Miniature Limit Switch Boasting Rigid Construction

K6PM-TH Thermal condition monitoring device K6PM-TH

Consistently and remotely monitor and analysis the temperature status of panel devices to achieve both labor-saving and significant risk mitigation of abnormal stop

K8DT-PH Phase-sequence Phase-loss Relay K8DT-PH

Our Value Design Products Increase the Value of Your Control Panels. Protect motors and other equipment from unstable voltages in the power supply system. Protect motors and other equipment by detecting phase sequence and phase loss for three-phase power supplies.

KM50-C Smart Power Monitor KM50-C

Power and current can be measured simultaneously. Measurement of generated power (regenerative power), leading reactive power, lagging reactive power, and consumed power. Low Cost Power Monitor.

KS1 Ionizer (Air Push Type) KS1

Wide Range of Nozzles for Optimal Ionization

LY Bi-power Relays LY

Power-switching Compact General-purpose Relays

M16 Indicator (Cylindrical 16-dia.) M16

Cylindrical 16-dia. Indicator

NE1A-EDR01 EtherNet/IP-DeviceNet Router NE1A-EDR01

Allows a safety system to be monitored from Ethernet.

NX1P2 NX-series NX1P2 CPU Units NX1P2

Up to eight axes of control via EtherCAT

NX-HAD[][][] NX-series High-speed Analog Input Unit NX-HAD[][][]

Simultaneous sampling of 4 channels with sampling times down to 5 μs

NX-SI / SO Safety I/O Unit NX-SI / SO

Build a simple and flexible safety system

R88M-K, R88D-KN[]-ML2 G5-series AC Servomotors/Servo Drives with Built-in MECHATROLINK-II Communications R88M-K, R88D-KN[]-ML2

MECHATROLINK-II network communication modules are now available for the G5 series.

S8FS-G Switch Mode Power Supply (15/30/50/100/150/300/600-W Models) S8FS-G

Superior Basic Performance That Ensures Reliability. Wide Range of Standards Certification and Greater Usability.

S8T-DCBU-02 Buffer Block S8T-DCBU-02

Prevents Equipment Stoppage, Data Loss,and Other Problems Resulting from Momentary Power Failures

TZ High-temperature Basic Switch TZ

Stable Operation at an Ambient Temperature of 400°C

V450-H Handheld Reader V450-H

Ultra-Rugged Direct Part Mark Handheld Reader

VT-S730-H PCB Inspection System VT-S730-H

The new series for VT-S730, 3D-SJI Systems

XW2R (PLCs) Connector-Terminal Block Conversion Units for PLCs XW2R (PLCs)

Connector-Terminal Block Conversion Units Designed Specifically to Connect PLCs

1ZAP2 / 1VAP2 Door Switches 1ZAP2 / 1VAP2

Door Switches with Built-in Basic Switches for Long Life

A22[] Knob-type Selector Switch (Cylindrical 22/25-dia.) A22[]

Install in 22-dia. or 25-dia. Panel Cutout

Accessories 61F Connecting Sockets, Mounting Brackets, DIN Rails Accessories 61F

Durable, Easy-to-handle Connecting Sockets and Mounting Brackets

CP1H CP series CP1H CPU Unit CP1H

4 Axis Position Control and Comprehensive Programmable Controller

CRT1-VID32ML(-1) / VOD32ML(-1) / VMD32ML(-1) Digital I/O Slave Units with MIL Connector (Vertical type) CRT1-VID32ML(-1) / VOD32ML(-1) / VMD32ML(-1)

Aggregation of multi-I/O points! A compact and little wiring slave with 32 points and MIL connector

CS1W-CIF31 USB-Serial Conversion Cable CS1W-CIF31

The CS1W-CIF31 USB-Serial Conversion Cable connects CS/CJ/CP Series, C Series, CVM1/CV Series of OMRON PLC (Programmable Controller) or PT (Programmable Terminal) to a personal computer's USB port.

CS1W-CLK SYSMAC CS-series Controller Link Units CS1W-CLK

New Controller Link Units, Now with 4,000 Send Words

D4A-[]N General-purpose Limit Switch D4A-[]N

The Limit Switch with Better Seal, Shock Resistance, and Strength

DRT2-[]D16SL(H)(-1) / []D32SLH(-1) Screw-less Clamp Terminals with Transistors DRT2-[]D16SL(H)(-1) / []D32SLH(-1)

Reduced Wiring and Labor on Factory Sites with Screw-less Terminal Wiring

E2C / E2C-H Separate Amplifier Proximity Sensor with Adjustment Potentiometer E2C / E2C-H

Separate Amplifier Sensor with Sensitivity Adjustment

E2J Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor E2J

Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands.

E3ZS Single-beam Safety Sensor E3ZS

Detects Intrusions into Hazardous Areas with a Single Beam and Complies with International Safety Standards.

E52 with Ferrule (Exclusive Models) Temperature Sensor with Ferrule (Exclusive Models) E52 with Ferrule (Exclusive Models)

Bayonet spring for molding machines, Crimping terminals, Used for measuring surface temperatures, Used for room temperature measurement, Waterproof model, Siliconecovered lead wires

E5EC, E5EC-B Digital Temperature Controller (48 x 96 mm) E5EC, E5EC-B

48 x 96 mm. Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications. E5EC-B is our Value Design product which increase the value of your control panel.

EE-SPX74 / SPX84 Slot-type Photomicrosensor with Connector (Modulated) EE-SPX74 / SPX84

Photomicrosensor with light modulation for reduced external light interference and a connector for easy maintenance.

G2R-[]-S (S) General-purpose Relay G2R-[]-S (S)

Slim and Space-saving Power Plug-in Relay

G3PA Solid State Relays G3PA

Extremely Thin Relays Integrated with Heat Sinks

G3S / G3SD Solid State Relays G3S / G3SD

Ultra-small Relay Breaks up to 1 A

G3TA Solid State Relays G3TA

I/O SSRs That Mount to OMRON's G7TC I/O Block

GT1-ROS16 / ROP08 / FOP08 Relay Output Units GT1-ROS16 / ROP08 / FOP08

Relay Output Unit Compatible with MULTIPLE I/O TERMINAL

GX-EC0211 / EC0241 Encoder Input Terminal 3-tier Terminal Block Type GX-EC0211 / EC0241

EtherCAT-compatible encoder input terminal which enables high-speed and accurate control.

H3Y-[]-B Solid-state Timer H3Y-[]-B

Our Value Design Products Increase the Value of Your Control Panels. Miniature Timer Compatible with the MY Relay.

H5AN Digital Timer H5AN

DIN-sized (72 × 72 mm) Quartz Timer with Multiple Functions

H7BX Multifunction Counter (DIN 72 × 72) H7BX

DIN 72×72 mm Multifunction Counter with a Bright,Easy-to-view, Negative Transmissive LCD.

K3HB-S Linear Sensor Indicator K3HB-S

Linear Sensor Indicator for High-speed, Highprecision Measurement and Discrimination

K8DT-PM Three-phase Voltage and Phase-sequence Phase-loss Relay K8DT-PM

Our Value Design Products Increase the Value of Your Control Panels. Protect motors and other equipment from unstable voltages in the power supply system. Protect motors and other equipment by detecting overvoltages, undervoltages, phase sequence, and phase loss for three-phase power supplies.

KM50-E Smart Power Monitor KM50-E

Power and current can be measured simultaneously. Measurement of generated power (regenerative power), leading reactive power, lagging reactive power, and consumed power. High-performance Power Monitor.

M2BJ Buzzer (Cylindrical 16-dia.) M2BJ

Buzzer Unit Series with Cylindrical 22-mm × 16-dia. Body

NJ501-R[][][] NJ-Series Robot Integrated CPU Units NJ501-R[][][]

Integration of Logic, Motion, OMRON Robot and Kinematics in one CPU.

NX-AD / DA NX-series Analog I/O Unit NX-AD / DA

Analog inputs and outputs to meet all machine control needs, from general purpose to high-speed synchronous control

NY5[][]-1 Industrial PC Platform NY-series IPC Machine Controller NY5[][]-1

The future will be IT driven, we make you part of it

S8FS-C Switch Mode Power Supply (15/25/35/50/75/100/150/200/350-W Models) S8FS-C

High Reliability at a Reasonable Cost. Reliable, Basic Power Supplies That Contribute to Stable Equipment Operation.

S8M Digital Multicircuit Protector S8M

Complete Flexible DC Circuit Protector That Has a Wide Array of Displays, Alarm Outputs, and Other Digital Functions.

V410-H Handheld Reader V410-H

Versatile, powerful decode performance for any application.

VT-S730 PCB Inspection System VT-S730

Omron's 3D-SJI (Solder Joint Inspection) Ensuring High-quality Products in an Efficient Manufacturing Environment

WS02-CFSC1-E Network Configurator WS02-CFSC1-E

Programming Software for Creating Safety Circuits.

XW3D Connector Terminal Boxes XW3D

Simple Wiring of Sensors, Limit Switches and Actuators

Y92A-[][]N Watertight Cover Y92A-[][]N

Ideal for Food Processing Machines or Other Applications that Require Watertightness

ZJ-SD Smart Electrostatic Sensor ZJ-SD

Smart Static Electricity Sensing: Making Static Electricity Visible

ZX-E Smart Sensors (Inductive Displacement Type) ZX-E

High-accuracy Detection of Metal Workpiece Displacement

3G3MX2-V1 Multi-function Compact Inverter 3G3MX2-V1

Born to drive machines   

3Z4S-LE VS-TEV Series Ultra-high-resolution Telecentric Lens for C-mount Cameras 3Z4S-LE VS-TEV Series

Ultra-high-resolution telecentric lens for 1.1-inch cameras

61F-G[]P Floatless Level Switch (Plug-in Type) 61F-G[]P

Compact, Space-saving Plug-in Type Ideal for Pump Panels or Building into Equipment.

CJ1W-NC[]71 CJ-series Position Control Unit with MECHATROLINK-II interface CJ1W-NC[]71

Decrease TCO with Simple Operation, Reduced Wiring, Batch Settings, and Batch Management

CRT1-[]D08SL(-1) / []D16SL(-1) Digital I/O Slaves Units with Clamp Terminals CRT1-[]D08SL(-1) / []D16SL(-1)

Screw-less Terminal Wiring Further Reduces Wiring Work and Saves Labor at the Production Site.

CS1W-FLN22 CS-series FL-net Unit CS1W-FLN22

Connect to Multivendor Controller Networks

CS1W-PMV SYSMAC CS-series Process Analog I/O Units CS1W-PMV

Provides the functionality of isolators, power supplies, signal converters, and other devices.

DRT2-[]D32B(-1) / []D32BV(-1) Board Terminals with MIL Connector DRT2-[]D32B(-1) / []D32BV(-1)

First Board-type Terminals for Smart Slaves!

E2EW Welding Proximity Sensor E2EW

Stable detection in lines containing both aluminum and iron

E3FA, E3RA, E3FB, E3RB Photoelectric Sensors E3FA, E3RA, E3FB, E3RB

A new generation in sensing performance

E52 (General purpose Models) Temperature Sensor (General-purpose Models) E52 (General purpose Models)

Sheathed Platinum Resistance Thermometers, Standard Platinum Resistance Thermometers, Sheathed Thermocouples and Standard Thermocouples

E5AC Digital Temperature Controller (96 x 96 mm) E5AC

96 x 96 mm. Large White PV Display That’s Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications.

EE-SPX-W Slot-type Photomicrosensor with Cable EE-SPX-W

Photomicrosensor with built-in amplifier and attached cable reduces external light interference.

FQ-CR Series Code Reader FQ-CR Series

Exceptional Reading Performance with Easy Operation

G3FM Solid State Relays G3FM

100-μA-max. Leakage Current, No Bleeder Resistor Required

G70D-SOC16 / FOM16 Relay Terminal G70D-SOC16 / FOM16

Compact, Low-profile 16-point Output terminal

H3YN-[]-B Solid-state Timer H3YN-[]-B

Our Value Design Products Increase the Value of Your Control Panels. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes.

K8DT-PZ Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay K8DT-PZ

Our Value Design Products Increase the Value of Your Control Panels. Protect motors and other equipment from unstable voltages in the power supply system. Detect overvoltages, undervoltages, voltage asymmetry, phase sequence, and phase loss for three-phase power supplies.

KM1 Multi-circuit Smart Power Monitor KM1

New Ways to Uncover Power Savings. Measure Multiple Distribution Panels at the Same Time.

R88M-G, R88D-GN[]-ML2 G-series AC Servomotors/Servo Drives with Built-in MECHATROLINK-II Communications R88M-G, R88D-GN[]-ML2

Saves Space and Enables MECHATROLINK-II Communications with the Controller.

S8VK-G Switch Mode Power Supply (15/30/60/120/240/480-W Models) S8VK-G

Reliable and Easy Operation-Worldwide Power Supply. Resistant in tough environments. Easy and fast installation. The most compact class on the market.

WL Two-circuit Limit Switch WL

Wide Range of Two-circuit Switches; Select One for the Operating Environment/Application WL/Basic models

XW2D Slim Connector-Terminal Block Conversion Units XW2D

New Slim Connector-Terminal Block Conversion Units.

XW3B Connector Terminal Boxes XW3B

Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize Sensor I/O Connectors with Reduced Labor and Greater Environmental Resistance.

ZE / ZV / ZV2 / XE / XV / XV2 Enclosed Switches ZE / ZV / ZV2 / XE / XV / XV2

Long Service Life and Large Breaking Power

ZX-T Smart Sensors High-Precision Contact Type ZX-T

The Smart Answer to High-precision Measuring Applications that Were Difficult with Non-contact Types

3G3RX2 High-function General-purpose Inverters 3G3RX2

Save energy and maximize performance with versatile inverter

3Z4S-LE VS-MCA Series Vibrations and Shocks Resistant Lens for C-mount Cameras 3Z4S-LE VS-MCA Series

Vibrations and shocks resistant lens for megapixel C-mount cameras

61F-UHS / HSL Floatless Level Switch (Ultra High-sensitivity Type) 61F-UHS / HSL

Ideal for Detecting Ice, Pure Water, or Humidity

CJ1W-CT021 CJ-series High-speed Counter Unit CJ1W-CT021

High-Speed, Flexible Control With A Wide Array of Features. This unit is available for CJ/NJ controller.

CJ1W-NC[][]4 CJ-series Position Control Units (High-Speed type) CJ1W-NC[][]4

Motion Control Capabilities with Unit Synchronization and Even Higher Speed

CJ1W-SCU CJ-series Serial Communications Units CJ1W-SCU

The Serial Communications Units That Enable High-speed Connections with External Devices. This unit is available for CJ/NJ controller.

CK[]M-CPU1[]1 Programmable Multi-Axis Controller CK3M/CK5M CPU Unit CK[]M-CPU1[]1

Multi-axis control with a fastest servo cycle time of 25 μs/5 axes enables precision machining

DRT2-TS04[] Temperature Input Terminals DRT2-TS04[]

Temperature Input Terminal with Smart Functionality

E2E2 Long-barrel Inductive Proximity Sensor E2E2

Proximity Sensor with a Long Screw Length

E2EF Proximity Sensor with All-stainless Housing E2EF

Metal Head for long-distance Detection that Withstands Harsh Environments Where the Workpiece Can Rub against the Sensor

E3F3 Photoelectric Sensor E3F3

Threaded Cylindrical Photoelectric Sensor with Built-in Amplifier for Use as an Optical Proximity Sensor High Noise-immunity with Photo-IC Technology

E3X-SD / NA Simple Fiber Amplifier Unit E3X-SD / NA

Simple and Affordable Fiber Amplifier Units

E52 (Low-cost Models) Temperature Sensor (Low-cost Models) E52 (Low-cost Models)

Low-cost Platinum Resistance Thermometers and Low-cost Thermocouples

E5CC-T Programmable Temperature Controller (Digital Controller) (48 × 48 mm) E5CC-T

48 × 48 mm. Programmable Controllers Join the E5[]C Series! Program up to 256 segments can handle a wide variety of applications.

G3R-I/O I/O Solid State Relays G3R-I/O

SSR with Plug-in Terminals The Same Shape as the G2R-1-S Power Relays

G7T I/O Relay G7T

Slim-styled I/O Relay Saves Space in Panel

H3RN-[]-B Solid-state timer H3RN-[]-B

Our Value Design Products Increase the Value of Your Control Panels. Compact, Multi-function Timers for G2R Relay Socket.

K8DT-TH Temperature Monitoring Relay K8DT-TH

Our Value Design Products Increase the Value of Your Control Panels. Ideal to prevent heater overheating. Self-latching output to contribute to safe equipment operation.

M22 Indicator (Cylindrical 22/25-dia.) M22

Round Indicator Series with 22 dia. and 25 dia. (when using a ring)

NS-NSRCL1 / 3 / 10 Machine Monitoring Software NS-Runtime NS-NSRCL1 / 3 / 10

Achieve machine/line monitoring and data logging on your office computer.

NX-TS NX-series Temperature Input Unit NX-TS

Standard and high-speed, high-precision temperature measurement and control

R88M-G, R88D-GT G-series AC Servomotors/Servo Drives with General-purpose Pulse-string or Analog Inputs R88M-G, R88D-GT

Support for a Wide Range of Applications with Position Control, Speed Control, Torque Control.

S8VK-T Switch Mode Power Supply (120/240/480/960 W Models) S8VK-T

Renewal of 400 V, 3-phase standard type. 480 W/960 W feature PFC for lower input current and higher efficiency (93% typ.) than conventional products

XS3 Round Water-resistant Connectors (M8/S8) XS3

Small Round Water-resistive Connectors

XW2Z-R Cables for I/O Relay Terminals XW2Z-R

Connect I/O Relay Terminals to I/O Units for Programmable Controllers with one touch.

61F-AO Alternate Operation Relay 61F-AO

Perfect for Alternate Operation of Two Pumps Free Power Supply Makes Maintenance Easy

CJ1W-ETN21 CJ-series Ethernet Unit CJ1W-ETN21

Organically Connect the Production Site and Management

CK3E Programmable Multi-Axis Controller CK3E

A controller with a width of only 28.6 mm provides complete control

Contact your OMRON representative for details.

CS1W-PPS01 SYSMAC CS-series Process Analog I/O Units CS1W-PPS01

Provides the functionality of isolators, power supplies, signal converters, and other devices.

DRT2-AD04(H) / DA02 Analog I/O Terminals DRT2-AD04(H) / DA02

Performs Calculations on Analog Values within the Slave Itself. Also Provides High Resolution at 1/30,000 (Full Scale) and Support for a Wide Variety of Data Sampling.

E2FM Proximity Sensor with All-stainless Housing E2FM

Highly Durable Proximity Sensor for Tough Environments

E2V-X[] All Metals and Long-distance Types E2V-X[]

Aluminum and Iron Both Detectable from Long Distances

E3T Ultracompact, Ultrathin Photoelectric Sensor with Built-in Amplifier E3T

The Improved E3T Series with Easier, Smoother Mounting and Installation

E52 (Exclusive Models) Temperature Sensor (Exclusive Models) E52 (Exclusive Models)

Thermocouples for Molding Machines, Thermocouples with Crimp Terminals, Surface Temperature Measurement, Room Temperature Measurement, Waterproof Platinum Resistance Thermometers, Corrosion-resistant Models, Pressure-resistant Explosion-proof Models and Double-element Models

E5EC-T Programmable Temperature Controller (Digital Controller) (48 × 96 mm) E5EC-T

48 × 96 mm. Programmable Controllers Join the E5[]C Series! Program up to 256 segments can handle a wide variety of applications.

H3CR-A Solid-state Multi-functional Timers H3CR-A

Multiple Operating Modes and Multiple Time Ranges. DIN 48 x 48-mm Multifunctional Timer.

K8DT-LS Conductive Level Controller K8DT-LS

Our Value Design Products Increase the Value of Your Control Panels. Ideal for water level control. Sensitivity adjustment and timer for easy usage.

MS-3 Series Laser Barcode Reader MS-3 Series

Ultra-Compact Laser Barcode Reader

NT-AL001 RS-232C/RS-422A Adapter NT-AL001

The NT-AL001 converts signals between RS-232C and RS-422A.

S8VS Switch Mode Power Supply (15/30/60/90/120/180/240/480-W Models) S8VS

Indication Monitor for Visualization of Operating Status For Even Greater Maintenance Efficiency * (* Models with indication monitor)

3Z4S-LE VS-MC Series Non-telecentric Macro Lens for C-mount Cameras 3Z4S-LE VS-MC Series

Vibrations resistant Non-telecentric Macro Lens with a 16-mm-dia. simple mechanism.

61F-AN Alternate Operation Relay 61F-AN

Increases Motor Life and Enables Operating Only One Pump When Cleaning Tanks or as an Emergency Measure for Pump Failures.

CJ1W-CLK CJ-series Controller Link Units CJ1W-CLK

New Controller Link Units, Now with 4,000 Send Words

CJ1W-NC[][]3 CJ series Position Control Units CJ1W-NC[][]3

High-speed, High-precision positioning with 1, 2, or 4 axes

CJ1W-V680C11 / V680C12 CJ Series ID Sensor Unit CJ1W-V680C11 / V680C12

Communication Unit Dedicated for RFID V680 Allowing Direct Connection to OMRON PLC CJ/CS/NJ-series

CS1W-DRM21-V1 CS-series DeviceNet Unit CS1W-DRM21-V1

A DeviceNet Unit for the CS Series That Boasts Industry-leading Performance and Functions

DRT2-[]D04CL(-1) / []D08C(-1) / []D08CL(-1) / []D16C(-1) / []D16CL(-1) Environment-resistive Terminals with Transistors DRT2-[]D04CL(-1) / []D08C(-1) / []D08CL(-1) / []D16C(-1) / []D16CL(-1)

Environment-resistive (IP67) I/O Terminals with Troubleshooting Functions such as Sensor Power Supply Short-circuit Detection

E2E-[]-IL[] IO-Link Proximity Sensor (Standard Models) E2E-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! Standard Proximity Sensor.

E2EQ NEXT Proximity Sensor DC 3-wire/DC 2-wire E2EQ NEXT

Enables easier and standardized designs previously not possible with fluororesin coating models

E32-L11FP / L1[]FS, E3X-DA[][]TG-S Wet Process Sensor E32-L11FP / L1[]FS, E3X-DA[][]TG-S

Stable Detection of Glass in Wet Processes. Non-contact Operation Simplifies Mounting and Maintenance.

E3Z Compact Photoelectric Sensor with Built-in Amplifier E3Z

The Standard for Photoelectric Sensors with a Secure Track Record of One Million Sold Yearly.

E52-THE5A / 6D / 6F Temperature Sensor (Thermistors) E52-THE5A / 6D / 6F

Element interchangeable thermistor (Exposed-lead Models, Exposed-lead Models with Screws ,Exposed-lead Models with Flange)

E5AC-T Programmable Temperature Controller (Digital Controller) (96 × 96 mm) E5AC-T

96 × 96 mm. Programmable Controllers Join the E5[]C Series! Program up to 256 segments can handle a wide variety of applications.

G3PC Solid State Relays with Failure Detection Function G3PC

Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater control systems, and contributes to maintenance improvements by the user.

G9H Hybrid Power Relay G9H

Hybridization of a Magnetic Relay and an SSR Achieves 10-A Switching for 10 Million Operations.

H3CR-F Solid-state Timer H3CR-F

DIN 48 × 48-mm Twin Timers

K8AK-AS Single-phase Current Relay K8AK-AS

Ideal for Current Monitoring for Industrial Facilities and Equipment. Monitor for overcurrents or undercurrents.

NJ501-[][][][] NJ-Series NJ501 CPU Units NJ501-[][][][]

Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are the features of industrial controllers. Ideal for large-scale, fast, and high-accurate control with up to 64 axes.

QX-830 Series Laser Barcode Reader QX-830 Series

Compact Industrial Laser Barcode Reader

S8JX-P Switch Mode Power Supply (300/600-W Models) S8JX-P

S8JX-P Series with EMI ClassB and Power Factor Correction is newly added to S8JX Series.

3Z4S-LE VS-MCH1 Series High-resolution, Vibrations and Shocks Resistant Lens for C-mount Cameras 3Z4S-LE VS-MCH1 Series

Vibrations resistant lens with iris plate system for megapixel C-mount cameras

CJ1W-FLN22 CJ-series FL-net Unit CJ1W-FLN22

Connect to Multivendor Controller Networks

CS1W-LCB01 / LCB05 Loop Control Boards CS1W-LCB01 / LCB05

By combining function blocks, a wide array of control methods, from basic PID control to cascade and feed-forward control can be easily configured.

CS1W-NC[]71 SYSMAC CS-series MECHATROLINK-II-compatible Position Control Units CS1W-NC[]71

Decrease TCO with Simple Operation, Reduced Wiring, Batch Settings, and Batch Management

E2EQ-[]-IL[] IO-Link Proximity Sensor (Spatter-resistant Models) E2EQ-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! A Proximity Sensor That Can Be Used in a Spatter Environment.

E2EQ Spatter-resistant Proximity Sensor E2EQ

Spatter-resistant Fluororesincoated Proximity Sensor

E3ZM-V Color Mark Detection Compact Photoelectric Sensor E3ZM-V

Color Mark Detection in a World-standard Size (11 × 21 × 32 mm), with High-speed Response (50 μs) and Accuracy in Spite of Sensing Object Movement

ES1B Infrared Thermosensor ES1B

Achieve Low-cost Measurements with an Infrared Thermosensor.

G3NA Solid State Relays G3NA

The reliable choice for Hockey-puck-style Solid State Relays. Available in a Wide Range of Currents.

GRT1-DRT DeviceNet Communications Unit GRT1-DRT

DeviceNet-compliant Interface Unit with up to 1,024 I/O Points at One Node

H3Y Solid-state Timer H3Y

Miniature Timer Compatible with the MY Relay

K8AK-AW Single-phase Overcurrent/Undercurrent Relay K8AK-AW

Ideal for Current Monitoring for Industrial Facilities and Equipment. Monitor for overcurrents and undercurrents simultaneously.

NJ501-5300 NJ-series NC Integrated Controller NJ501-5300

Realize high-accuracy synchronization motion control (MC) and numerical control (NC) functions by ONE controller.

NX-EC0[][][] NX-series Incremental Encoder Input Unit NX-EC0[][][]

More precise timing control by synchronizing the position data with the EtherCAT® Distributed Clock

QX-870 Series Laser Barcode Reader QX-870 Series

Industrial Raster Laser Barcode Reader

XW2C-20G6-IO16 Connector-Terminal Block Conversion Unit with Two-tiered I/O Terminal Block with Common XW2C-20G6-IO16

Common terminal provided. Use for either PLC Input Unit or Output Unit merely by changing short bar.

CJ1W-DRM21 CJ-series DeviceNet Unit CJ1W-DRM21

Smallest in the Industry! A DeviceNet Unit for the CJ Series that Boasts Industry-leading Performance and Functions

CJ1W-PH41U / AD04U CJ-series Process Analog I/O Unit CJ1W-PH41U / AD04U

A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5 V)

CS1W-CT021 / 041 SYSMAC CS-series High-speed Counter Units CS1W-CT021 / 041

High-Speed, Flexible Control With A Wide Array of Features

CS1W-NC[][]3 SYSMAC CS-series Position Control Units CS1W-NC[][]3

High-speed, High-precision positioning with 1, 2, or 4 axes

E2ER / E2ERZ Oil-resistant Proximity Sensors E2ER / E2ERZ

Proximity Sensors That Withstand Cutting Oil to Reduce Failures Caused by Ingress of Cutting Oil

E3ZM-C Oil-resistant, Robust, Compact Photoelectric Sensor E3ZM-C

Photoelectric Sensor for the Automotive and Machine Tool Industries

E5CN-H Advanced Digital Temperature Controller (48 x 48 mm) E5CN-H

A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function.

G3NE Solid State Relays G3NE

Compact, Low-cost, SSR Switching 5 to 20 A

H3YN Solid-state Timer H3YN

Miniature Timer with Multiple Time Ranges and Multiple Operating Modes

K8AK-VS Single-phase Voltage Relay K8AK-VS

Ideal for Voltage Monitoring for Industrial Facilities and Equipment. Monitor for overcurrents or undercurrents.

NJ501-1[]20 / NJ101-[][]20 NJ-series Database Connection CPU Units NJ501-1[]20 / NJ101-[][]20

The NJ-series Machine Automation Controller supports the Database Connection function. Machine data can be quickly stored in a database by connecting the Controller directly to the database.

NX-ECS[][][] NX-series SSI Input Unit NX-ECS[][][]

Synchronous Serial Interface (SSI) to connect external axes to the Sysmac system

UMA Series Safety Mat UMA Series

Easy-to-install safety mat with advanced features

V500-R2 Laser-type Bar Code Reader V500-R2

The World’s Smallest Bar Code Reader That Fits Essentially Anywhere. *According to OMRON investigation in January 2013.

XW2C-20G5-IN16 Connector-Terminal Block Conversion Unit with Common XW2C-20G5-IN16

Features like a common terminal and LED operation indicators reduce control panel wiring for input devices.

CJ1W-EIP21 / EIP21S CJ-series EtherNet/IP Unit CJ1W-EIP21 / EIP21S

EtherNet/IP unit with tag data link capacity of 180,000 words or more

E2EZ Chip-immune Inductive Proximity Sensor E2EZ

Chip-immune Inductive Proximity Sensor

E5AN-H, E5EN-H Advanced Digital Temperature Controller (96 x 96 mm and 48 x 96 mm) E5AN-H, E5EN-H

A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function.

H3RN Solid-state Timer H3RN

Ultra-slim Timer for G2R Relay Socket

K8AK-VW Single-phase Overvoltage/Undervoltage Relay K8AK-VW

Ideal for Voltage Monitoring for Industrial Facilities and Equipment. Monitor for overcurrents and undercurrents simultaneously.

NJ501-1340 NJ-series NJ501 SECS/GEM CPU Unit NJ501-1340

The NJ501 SECS/GEM CPU Unit is a NJ-series machine automation controller, and has built-in the SECS/GEM communications functions which are the standards in the semiconductor industry. It is the high-performance controller that fuses machine control and host communications.

NX-PG0[][][] NX-series Pulse Output Unit NX-PG0[][][]

Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives

XW2E Connector-Terminal Block Conversion Units with Three-tiered Terminal Block with Common XW2E

A common terminal is provided for device power supply and the three-tiered structure means easier wiring.

CS1W-EIP21 / EIP21S CS-series EtherNet/IP Unit CS1W-EIP21 / EIP21S

EtherNet/IP unit with tag data link capacity of 180,000 words or more

CS1W-V680C11 / V680C12 CS Series ID Sensor Unit CS1W-V680C11 / V680C12

Communication Unit Dedicated for RFID V680 Allowing Direct Connection to OMRON PLC CJ/CS/NJ-series

E2EH Proximity Sensor Ideal for High Temperatures and Cleaning Processes E2EH

Proximity Sensor Ideal for the Food and Beverage Industry

FQM1 Series Flexible Motion Controllers FQM1 Series

Advanced Power in Three Applications: Motion Control, Measurement Control, and High-speed Response Control

FZ-LES Series Lens for FZ-series Small Cameras FZ-LES Series

Lens for small camera of Vision Sensor FZ series.

H3DK-M / -S Multi-range, Multi-mode Timer H3DK-M / -S

DIN Track-mounted, 22.5-mm-width Standard Timer Series

K8AK-PH Phase-sequence Phase-loss Relay K8AK-PH

Three-phase Phase-sequence Phase-loss Relay Using Voltage Detection Method. 22.5 mm (W). Two SPDT output relays

MK-S General-purpose Relays MK-S

New Super MK Relays. Models with Latching Lever Added to the Series.

NJ501-4[][][] NJ-series NJ Robotics CPU Units NJ501-4[][][]

New controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are the features of industrial controllers provides robot control function. In addition to robot control, general motion control with up to 64 axes can be also performed.

NX-ILM400 NX-series IO-Link Master Unit NX-ILM400

IO-Link makes sensor level information visible and solves the three major issues at manufacturing sites! The screwless clamping terminal block reduces wiring work.

S8AS Smart Power Supply S8AS

A New Type of Power Supply That Provides Safety and Maintainability

SGE / SCC Safety Edge/Edge Controller SGE / SCC

Safety sensors to detect contacts by mounting to moving parts of hazards

XW2F Connector-Terminal Block Conversion Units with Push-in Terminals XW2F

Accelerate Reductions in Factory Wiring and Labor with Screwless Terminals.

CJ2H-CPU6[]-EIP CJ-series CJ2H (Built-in EtherNet/IP) CPU Units CJ2H-CPU6[]-EIP

Flagship PLCs with Built-in Multifunctional Ethernet Port

E2F Resin-case Proximity Sensor E2F

Proximity Sensor with Resin Case with Superb Water Resistance

E3ZM Compact Photoelectric Sensor with Stainless Steel Housing E3ZM

Stainless Steel Housing Ideal for Food Industry (PAT Pending)

ES1C Infrared Thermosensorc ES1C

Achieve Superior Environmental Resistance and a Wide Measurement Range of 0 to 400°C.

H3DK-F Twin Timer H3DK-F

DIN Track-mounted, 22.5-mm-width Standard Timer Series

K8DS-PH Phase-sequence Phase-loss Relay K8DS-PH

Three-phase Phase-sequence Phase-loss Relay Using Voltage Detection Method. 17.5 mm (W). One SPDT output relays

NJ301-[][][][] NJ-Series NJ301 CPU Units NJ301-[][][][]

Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability that are he features of industrial controllers Ideal for small-scale control with up to 8 axes

NX-PD / PF / PC / TBX NX-series System Unit NX-PD / PF / PC / TBX

Power Supply Unit, Power Connection Unit, and FG Terminal Expansion Unit for NX-Series

S8TS Switch Mode Power Supply S8TS

Block-type Switch Mode Power Supply That Mounts to DIN Rail

V680 Series RFID System V680 Series

RFID Systems with ISO/IEC 18000-3 (ISO/IEC15693) Compliance

XW2N Connector-Terminal Block Conversion Unit with 16-input e-CON Terminal Block with Common XW2N

Conversion Unit with Industrial Standard e-CON Terminal Block Connectors

CJ2M-CPU3[] / CPU1[] / MD21[] CJ-series CJ2M CPU Units, Pulse I/O Modules CJ2M-CPU3[] / CPU1[] / MD21[]

Since 2001, CJ1M-series PLCs are in control of a wide variety of applications worldwide. The accumulated experience and advancements in technology now result in CJ2M; fully compatible, yet fully new.

E2FQ Chemical-resistant Proximity Sensor E2FQ

Inductive Proximity Sensor with Chemical-resistant Fluororesin Case

H3DK-G Star-delta Timer H3DK-G

DIN Track-mounted, 22.5-mm-width Standard Timer Series

K8AK-PM Three-phase Voltage and Phase-sequence Phase-loss Relay K8AK-PM

Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. 22.5 mm (W). Two SPDT output relays

NJ101-[][][][] NJ-Series NJ101 CPU Units NJ101-[][][][]

Sysmac solutions for every machine Controllers ideal for simple machines

NX-CIF NX-series Communications Interface Units NX-CIF

Provides simplicity and flexibility in connecting serial devices to EtherCAT

CJ1W-NC[]81 / []82 CJ-series Position Control Units with EtherCAT interface CJ1W-NC[]81 / []82

Preeminent control performance and easy operation feature of EtherCAT improve the production efficiency.

E2EY Aluminum-detecting Proximity Sensor E2EY

A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected.

H3DK-H Power OFF-delay Timer H3DK-H

DIN Track-mounted, 22.5-mm-width Standard Timer Series

K8DS-PM Three-phase Voltage and Phase-sequence Phase-loss Relay K8DS-PM

Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. 17.5 mm (W). One SPDT output relays

MM Power Relay MM

Stable Contact Reliability and Long Life

NX-CSG NX-series Communication Control Unit NX-CSG

Quick, easy, and flexible to integrate safety into production lines

NX-V680C NX-series RFID Units NX-V680C

RFID V680 communications units create faster and more consistent field networks, supports controller distribution, and enables better traceability

XW2Z (Standard-type) Connecting Cables for Connector-Terminal Block Conversion Units (Shielded) XW2Z (Standard-type)

Connect Connector-Terminal Block Conversion Units (XW2[]) to I/O Units for Programmable Controllers with one touch.

E3Z-LS Distance-settable Photoelectric Sensor E3Z-LS

Distance-settable Sensor Unaffected by Workpiece Color and Background

E5CS Temperature Controllers E5CS

Simple Functions in DIN 48 × 48 mm-size Plug-in Temperature Controllers

GI-SMD / SID Safety I/O Terminal GI-S series GI-SMD / SID

Safety I/O Terminals for CIP Safety™

H3DS Solid-state Timer H3DS

DIN Track Mounted, Standard 17.5-mm Width Timer Range

K8AK-PA Three-phase Asymmetry and Phase-sequence Phase-loss Relay K8AK-PA

Ideal for 3-phase Voltage Asymmetry Monitoring for Industrial Facilities and Equipment. 22.5 mm (W). One SPDT output relays

MMK Latching Relay MMK

Mechanically Latching Relays Based on the MM Power Relay

E5GN Basic-type Digital Temperature Controller (48 x 24 mm) E5GN

New 48 x 24-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function.

K8DS-PA Three-phase Asymmetry and Phase-sequence Phase-loss Relay K8DS-PA

Ideal for 3-phase Voltage Asymmetry Monitoring for Industrial Facilities and Equipment. 17.5 mm (W). One SPDT output relays

NX-EIC202 NX-series EtherNet/IP™ Coupler Unit NX-EIC202

Connecting to open industrial network standard EtherNet/IP

K8AK-PW Three-phase Voltage Relay K8AK-PW

Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. 22.5 mm (W). Two SPDT output relays

NA Series Programmable Terminal NA Series

The Omron Sysmac HMI enables faster, more efficient control and monitoring - and a more natural, proactive relationship between operator and machine. Wide screen models: 7, 9, 12 and 15 inches

XW2Z-[][][]P-V / S-V / S-CV / T Host Link Cables (RS-232C Cables for Programmable Controller) XW2Z-[][][]P-V / S-V / S-CV / T

Ideal Cables for between Programmable Controllers and Host Computers

E3Z-G Grooved-type Photoelectric Sensor with Built-in Amplifier E3Z-G

Photoelectric Sensor with Grooved Design and Easy Settings

K8DS-PU Three-phase Undervoltage and Phase-sequence Phase-loss Relay K8DS-PU

Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. 17.5 mm (W). One SPDT output relays

E3S-C Oil-resistive, Long-range Photoelectric Sensor with Metal Housing E3S-C

Water- and Oil-resistant Photoelectric Sensor with Metal Housing Used for Long-range Sensing

E5CN-HT Programmable Temperature Controller (Digital Controller) (48 x 48 mm) E5CN-HT

Programmable Controllers Join the Series! Program up to 256 segments and take advantage of the high cost performance of the new LCD that improves both the field of view and contrast.

K8DS-PZ Three-phase Voltage, Asymmetry, and Phase-sequence Phase-loss Relay K8DS-PZ

Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. 17.5 mm (W). One SPDT output relays

E3S-CL Distance-settable Photoelectric Sensor with Metal Case E3S-CL

Simply Set the Distance to Reliably Detect Workpieces of Various Colors

E5AN-HT, E5EN-HT Programmable Temperature Controller (Digital Controller) (96 x 96 mm and 48 x 96 mm) E5AN-HT, E5EN-HT

Programmable Controllers Join the Series! Program up to 256 segments and take advantage of the high cost performance of the new LCD that improves both the field of view and contrast.

FH Series Vision System FH Series

AI-based automated visual inspection

K8AK-TS / PT Thermistor Motor Protection Relay K8AK-TS / PT

Monitor Temperature Rise through Internal Motor Loss

E5CSV Temperature Controllers E5CSV

Easy Setting Using DIP Switch and Simple Functions in DIN 48 × 48 mm-size Temperature Controllers

K8AK-LS Conductive Level Controller K8AK-LS

Ideal for Liquid Level Control in Industrial Facilities and Equipment.

K8AK-TH Temperature Monitoring Relay K8AK-TH

Compact and Slim Relay Ideal for Temperature Alarms and Monitoring

FQ2 Smart Camera FQ2

Advanced inspection in a compact housing. Expanded performance and functionality. Camera, Communications, Software Tools, and Much More.

E3S-LS3[] PCB Sensors E3S-LS3[]

Reliable Detection Unaffected by PCB Holes or Notches

NE1A-SCPU0[]-EIP Safety Network Controller NE1A-SCPU0[]-EIP

Visualizes the Safety System by Directly Connecting EtherNet/IP of the SYSMAC CS/CJ Series

OS32C Safety Laser Scanner OS32C

Compact (104.5 mm), lightweight (1.3 kg) and easy-to-install Safety Laser Scanner

E3S-R Transparent Object Detection Sensor E3S-R

Ideal for Detecting Glass Wafers and Other Transparent Objects

V680S Series RFID System V680S Series

3 in 1 RFID: Antenna, Amplifier & Controller

A22R/M22R Pushbutton Switches / Indicators A22R/M22R

Robust and Graceful design Pushbutton Switches

CJ1W-PNT21 PROFINET IO controller CJ1W-PNT21

This module is designed for use with any CPU unit belonging to Omron’s highly successful CJ1 series of programmable logic controllers.

CJ1W-PRM21 PROFIBUS-DP Master unit CJ1W-PRM21

PROFIBUS-DP master class one with support of DP-V1 data types.

CJ1W-PRT21 PROFIBUS-DP slave unit CJ1W-PRT21

PROFIBUS-DP I/O link unit

CP1W-EIP61 EtherNet/IP Communication Module for CP1L/CP1H PLCs CP1W-EIP61

Versatile, Low-Cost EtherNet/IP Adapter for CP1L/CP1H PLCs

CP1W-MODTCP61 CP1 Modbus/TCP Adapter CP1W-MODTCP61

Modbus/TCP Master for CP1L and CP1H Micro PLCs Modbus/TCP Slave for CJ2M-CPU3x, CP1L and CP1H PLCs

CS Series Programmable Controllers CS Series

Fully Integrated Sequence and Process Control for the Ideal Control System for Every Application

CS1W-MC Motion control units CS1W-MC

High-precision, motion controller with multitasking G-language programming

CS1W-PRM21 PROFIBUS-DP master unit CS1W-PRM21

Exchanges I/O data and communication/status information with the CPU of the PLC

CX-Designer FA Integrated Tool Package CX-One CX-Designer

Intuitive operability will increase programming efficiency from screen data creation to debugging for NS series.

E2A3 Cylindrical Proximity Sensor E2A3

High Quality for Extra Long Distance

E3FC Photoelectric sensors in M18 stainless steel housing E3FC

Best durability for wash-down applications

E3ZS, E3FS Single-beam Safety Sensor E3ZS, E3FS

Detects Intrusions into Hazardous Areas with a Single Beam and Complies with International Safety Standards.

E5AC-800 Digital Temperature Controller (Simple Type) (96 × 96 mm) E5AC-800

96 × 96 mm. Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications.

E5CC-800, E5CC-U-800 Digital Temperature Controller (Simple Type) (48 × 48 mm) E5CC-800, E5CC-U-800

48 × 48 mm. Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications.

E5CD-800 Digital Temperature Controller (Simple Type) (48 x 48 mm) E5CD-800

48 x 48 mm. Optimize Control by Detecting Status Changes. Easily Satisfy Both Productivity and Quality.

E5EC-800 Digital Temperature Controller (Simple Type) (48 × 96 mm) E5EC-800

48 × 96 mm. Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications.

E5ED-800 Digital Temperature Controller (Simple Type) (48 x 96 mm) E5ED-800

Optimize Control by Detecting Status Changes. Easily Satisfy Both Productivity and Quality.

G3NB Solid State Relays G3NB

SSR with output (5 to 90 A) at a reasonable price

GRT1-ECT Smartlice GRT1-ECT

The smartest modular I/O system

GRT1-PNT SmartSlice GRT1-PNT

The smartest modular I/O system

GRT1-PRT SmartSlice GRT1-PRT

The smartest modular I/O system

H3CR-G Solid-state Timer H3CR-G

DIN 48 × 48-mm Star-delta Timer

H3CR-H Solid-state Timer H3CR-H

DIN 48 × 48-mm Power OFF-delay Timer

J7MN Motor Protection Circuit Breaker (MPCB) J7MN

MPCB system (motor protection CLASS 10)

J7TKN Thermal Overload Relay J7TKN

Thermal Overload Relay

K3GN 1/32 DIN Digital Panel Meter K3GN

1/32 DIN Digital Panel Meter for Downsizing Equipment and Control Panels

K6EL Ground Fault Relay K6EL

Economical, Compact, High-performance, DIN 48 × 48-mm Ground Fault Relay for Low Voltages

K8AK / K8DS Series Measuring & Monitoring Relays K8AK / K8DS Series

DIN 22.5/17.5 Size Lineup of A Wide Range of Measuring and Monitoring Relays

NB-S Series Programmable Terminal NB-S Series

The feature-rich, economic programmable terminal

NT-DRT21 Programmable Terminal DeviceNet Interface Unit NT-DRT21

Connect to DeviceNet Using a NT31/631-series Programmable Terminal as a Slave.

NXR-ILM08C-ECT Environment-resistive Remote Terminal NXR-series IO-Link Master Unit for EtherCAT® NXR-ILM08C-ECT

Streamline commissioning and maintenance efforts and stabilize operation

R88M-KE, R88D-KP G5-series Pulse Train Input Type AC Servomotors/Servo Drives R88M-KE, R88D-KP

High-performance Servo Optimal for positioning Application.

S8VK-C Switch Mode Power Supply (60/120/240/480-W Models) S8VK-C

Cost-effective Single Phase Power Supply Universal input and Safety standards for worldwide applications Space-saving Compact Design

XW5T-P DIN Track Push-in Terminal Blocks XW5T-P

Our Value Design Products Increase the Value of Your Control Panels. Push-in Plus Terminal Blocks to Downsize Control Panels and Save Work.

XW5T-S DIN Track Terminal Blocks with Screw Terminals XW5T-S

Global-standard DIN Terminal Blocks for Control Panels