* Ordering information
* Dimensions, and etc
can be found in our PDF brochure.
Modbus/TCP Master for CP1L
and CP1H Micro PLCs
Modbus/TCP Slave for CJ2M-CPU3x, CP1L and CP1H PLCs
The CP1W-MODTCP61 allows Omron CP1L, CP1H
and CJ2M-CPU3x PLCs to function as slave nodes on a Modbus/TCP network.
The adapter can function as either a Modbus/TCP Master or as a Modbus/TCP
Slave, but not both simultaneously. The Modbus/TCP Master mode when used
with CP1H/L only controls/monitors IO blocks and other remote devices.
The Modbus/TCP Slave mode responds to commands from a Modbus/TCP Master
such as a PC or PLC.
- Web page configuration for IP Address &
Perfect for Data
Collection - The CP1W-
MODTCP01-US turns a CJ2M-CPU3x, CP1L/H PLC into a Modbus/TCP Slave that
can easily share information with a Modbus/TCP Master for remote data
collection or control
Connections - If the adapter is
configured in Modbus/TCP slave mode, it can also support communications
to CX-Programmer, NS HMI or other devices that use FINS (Omronís open
Modbus/TCP & FINS Ethernet - Allows CS/CJ PLCs with Ethernet
or EtherNet/IP to communicate using FINS through a CP1 PLC as a Modbus/TCP
Inquire About CP1 ModBus/TCP Adapter